- Location
- Frome, Somerset
- Main postcode district
- BA11
- Nearby (straight line)
- Westbury (6 miles), Warminster (6 miles) and Trowbridge (8 miles)
- Survey and quote
- Free, with a fixed written quote
A loading bay conversion is a project that changes how a loading opening works, most often turning a ground-level door into a dock by lowering the approach, forming a leveller pit or adding a dock lift. It also covers upgrading older bays with new levellers, insulated doors, shelters and safety equipment while reusing the structure that is still sound.
Is this right for your site in Frome?
A unit in Frome with enough yard depth may suit a recessed approach, while tighter plots usually point towards a dock lift or loading house. Planning and building control questions for a conversion in Frome are checked during the survey, so the programme allows for any approvals that are needed.
Landlords in Frome upgrading vacant units to attract logistics tenants can add docks or modernise tired bays as part of wider refurbishment works.
How does an installation in Frome work? First, a free, no-obligation survey to measure up and understand the operation. Next, a fixed written quote. Then a programme agreed with you, so the work fits around deliveries, with out-of-hours slots if needed. The installation itself is carried out by specialist engineers who answer to us, and it finishes with testing, a walk-through for your staff and a handover pack.
How much does a loading bay conversion cost?
A loading bay conversion typically costs £18,000 to £45,000 per bay, excluding VAT. Upgrades that reuse a sound pit and opening sit towards the lower end; full conversions with excavation, retaining walls and drainage sit towards the top.
What moves the price:
- Method: recessed approach, new internal pit, dock lift or bay upgrade.
- Ground and drainage: excavation depth, ground conditions, buried services and drainage at the foot of any ramp.
- Structure: widening or raising the opening, new lintels or steelwork, and making good cladding or masonry.
- Equipment: door, leveller, shelter and safety specification.
- Phasing: keeping a live dock running, and any out-of-hours working.
Unusual groundworks, such as diverting drains or major structural steel, are priced separately after survey. Following a free site survey, the written quote is the fixed price. VAT is added at the standard rate.
What are the ways to convert a ground-level door into a dock?
There are three main ways to convert a ground-level door into a dock: lower the yard to form a recessed approach, install a dock lift at the door, or add a dock alongside the building. The right one depends on yard space, levels and how many trailers you handle.
- Recessed approach: the yard is excavated on a gradient so the trailer bed meets the building floor, with a leveller and drainage at the dock face. Best for high trailer volumes where there is yard depth for the ramp.
- Dock lift: a scissor lift table at the door raises goods to trailer height. Good for tight sites and mixed fleets.
- Edge-of-dock solutions: where the height difference is small, a modest recess with an edge-of-dock leveller can be enough.
Upgrades to existing docks follow the same survey: replacing mechanical levellers, swapping shutters for insulated doors, and adding shelters and restraints. Our guide to converting a ground-level door into a loading dock compares the methods.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Scope to convert ground-level doors into docks or add lift tables
- Power supply at each bay, including three-phase availability
- How often each door cycles during a typical shift
- Clear opening width and height for each door
- Asbestos register and any other site hazard information
- Wheel guide positions and yard markings for reversing vehicles
Options to discuss
Additional bays
New openings formed in an existing wall, with the structural alterations and approvals needed, to increase the number of docks a building can run.
Dock lift conversion
A scissor lift table at the existing door raises goods to trailer height, avoiding yard excavation where space, levels or ground conditions rule out a ramp.
Which rules apply in England?
Workplace safety in England is regulated by HSE. For a loading bay in Frome, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about loading bay conversions in Frome
Can you work alongside our main contractor on a new build in Frome?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Which building and safety rules apply to a site in Frome?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Frome, we check what applies at survey and design to it.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Frome, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Is a recessed dock or a dock lift better?
A recessed dock is usually better for high trailer volumes, because forklifts drive straight on and off. A dock lift suits tight sites, mixed fleets and lower volumes, and avoids excavating the yard. The survey looks at space, levels, drainage and traffic before recommending one.
Do I need a new door when converting a bay?
Not always. If the opening stays the same size and the door is in good condition, it can sometimes be kept. Where the opening changes or the door is old and uninsulated, a new door is usually included, and in England it should meet the Approved Document L limiting U-value for large doors.
Loading bay conversions and upgrades near Frome
If your site is not in Frome itself, it may be near one of these: Westbury (6 miles), Warminster (6 miles) and Trowbridge (8 miles). Pick the closest.
Other loading bay services in Frome
Full guide to loading bay conversions · Everything we do in Frome
Have photos of the door, leveller or shelter? Send them with your enquiry and we can give a clearer answer for your Frome site.