- Location
- Corby, Northamptonshire
- Main postcode district
- NN17
- Nearby (straight line)
- Uppingham (6 miles), Kettering (7 miles) and Market Harborough (10 miles)
- Survey and quote
- Free, with a fixed written quote
A loading bay conversion is a project that changes how a loading opening works, most often turning a ground-level door into a dock by lowering the approach, forming a leveller pit or adding a dock lift. It also covers upgrading older bays with new levellers, insulated doors, shelters and safety equipment while reusing the structure that is still sound.
How does this suit sites in Corby?
Planning and building control questions for a conversion in Corby are checked during the survey, so the programme allows for any approvals that are needed. Ground conditions, drainage and buried services vary from site to site in Corby, which is why every conversion starts with a levels survey before any design.
A unit in Corby with enough yard depth may suit a recessed approach, while tighter plots usually point towards a dock lift or loading house.
The survey is free, the quote is written and the price is fixed: that is how every installation in Corby begins. We then manage the work from start to finish. Fitting is carried out by specialist installers under our management, phased so the operation keeps moving, and nights or weekends can be booked by arrangement. On the final day we test the equipment with you and hand over the operating and maintenance information.
One feature of the freight network near Corby is worth a mention: Northamptonshire's distribution cluster runs along the A43 and A14 corridors. Busy or quiet, a dock needs equipment sized for the vehicles it receives.
How much does a loading bay conversion cost?
A loading bay conversion typically costs £18,000 to £45,000 per bay, excluding VAT. Upgrades that reuse a sound pit and opening sit towards the lower end; full conversions with excavation, retaining walls and drainage sit towards the top.
What moves the price:
- Method: recessed approach, new internal pit, dock lift or bay upgrade.
- Ground and drainage: excavation depth, ground conditions, buried services and drainage at the foot of any ramp.
- Structure: widening or raising the opening, new lintels or steelwork, and making good cladding or masonry.
- Equipment: door, leveller, shelter and safety specification.
- Phasing: keeping a live dock running, and any out-of-hours working.
Unusual groundworks, such as diverting drains or major structural steel, are priced separately after survey. Following a free site survey, the written quote is the fixed price. VAT is added at the standard rate.
What are the ways to convert a ground-level door into a dock?
There are three main ways to convert a ground-level door into a dock: lower the yard to form a recessed approach, install a dock lift at the door, or add a dock alongside the building. The right one depends on yard space, levels and how many trailers you handle.
- Recessed approach: the yard is excavated on a gradient so the trailer bed meets the building floor, with a leveller and drainage at the dock face. Best for high trailer volumes where there is yard depth for the ramp.
- Dock lift: a scissor lift table at the door raises goods to trailer height. Good for tight sites and mixed fleets.
- Edge-of-dock solutions: where the height difference is small, a modest recess with an edge-of-dock leveller can be enough.
Upgrades to existing docks follow the same survey: replacing mechanical levellers, swapping shutters for insulated doors, and adding shelters and restraints. Our guide to converting a ground-level door into a loading dock compares the methods.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Traffic routes for vehicles and separation of pedestrians
- Age and condition of the equipment already in place
- Power supply at each bay, including three-phase availability
- Headroom above the opening and which track type will suit it
- Control positions, isolators and any existing interlocks
- Dock height and the mix of trailers you load
Options to discuss
Recessed dock approach
The yard is lowered on a ramp so the trailer bed meets the building floor, with a leveller pit, retaining walls and drainage. Suited to high trailer volumes with yard depth.
Additional bays
New openings formed in an existing wall, with the structural alterations and approvals needed, to increase the number of docks a building can run.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Corby. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about loading bay conversions in Corby
Is the site survey in Corby free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Corby site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Corby, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Can we keep working during a conversion?
Yes, in most cases. Conversions are phased bay by bay so the rest of the dock keeps running, and temporary loading is agreed before any bay is taken out of use. Openings are kept secure throughout, and noisy or disruptive work can be timed around your busiest periods.
How long does a loading bay conversion take?
The length of a conversion depends mainly on the civils, concrete curing and any approvals needed before work starts. Upgrade-only projects are much quicker than full conversions. We set out the programme for each bay in writing with the quote, so you can plan temporary loading.
Loading bay conversions and upgrades near Corby
Distances are measured from Corby. Nearby towns we cover include Uppingham (6 miles), Kettering (7 miles) and Market Harborough (10 miles), and other towns in the area are covered too.
Other loading bay services in Corby
Full guide to loading bay conversions · Everything we do in Corby
Have photos of the door, leveller or shelter? Send them with your enquiry and we can give a clearer answer for your Corby site.