- Location
- Brighton, East Sussex
- Main postcode district
- BN2
- Nearby (straight line)
- Hove (1 mile), Portslade (3 miles) and Rottingdean (4 miles)
- Survey and quote
- Free, with a fixed written quote
A loading bay conversion is a project that changes how a loading opening works, most often turning a ground-level door into a dock by lowering the approach, forming a leveller pit or adding a dock lift. It also covers upgrading older bays with new levellers, insulated doors, shelters and safety equipment while reusing the structure that is still sound.
What should sites in Brighton consider?
Planning and building control questions for a conversion in Brighton are checked during the survey, so the programme allows for any approvals that are needed. Ground conditions, drainage and buried services vary from site to site in Brighton, which is why every conversion starts with a levels survey before any design.
Older factories in Brighton built with ground-level roller shutters are frequent conversion candidates once the business starts receiving articulated trailers rather than vans.
We never ask you to commit before you have a fixed price. A free survey at your Brighton site comes first, followed by a written quote. When the order goes ahead, we plan the installation around your operation, book any out-of-hours working you need and manage the specialist installation engineers on site. The job ends with a full test, a run-through for the people who will use the equipment and a set of handover documents.
What does a loading bay conversion involve, step by step?
A loading bay conversion runs from a levels survey through design and approvals to civils, equipment and commissioning. A typical recessed-dock conversion follows this order:
- Levels survey: floor, yard and drainage levels, plus buried services.
- Design: approach gradient, pit and dock face details, drainage and equipment layout.
- Approvals: building control and any planning application.
- Civils: breaking out, excavation, retaining walls, drainage, pit and new concrete.
- Opening works: adjusting the opening and making good the cladding or masonry.
- Equipment: leveller, door, shelter or seal, bumpers and wheel guides.
- Electrics and controls: supplies, panels, lights and any interlocks.
- Commissioning: testing with a trailer and handover.
Upgrade-only projects skip most of the civils, which is why they cost less and finish sooner. All work is carried out by specialist groundworks, installation and electrical teams working under our management.
How much does a loading bay conversion cost?
A loading bay conversion typically costs £18,000 to £45,000 per bay, excluding VAT. Upgrades that reuse a sound pit and opening sit towards the lower end; full conversions with excavation, retaining walls and drainage sit towards the top.
What moves the price:
- Method: recessed approach, new internal pit, dock lift or bay upgrade.
- Ground and drainage: excavation depth, ground conditions, buried services and drainage at the foot of any ramp.
- Structure: widening or raising the opening, new lintels or steelwork, and making good cladding or masonry.
- Equipment: door, leveller, shelter and safety specification.
- Phasing: keeping a live dock running, and any out-of-hours working.
Unusual groundworks, such as diverting drains or major structural steel, are priced separately after survey. Following a free site survey, the written quote is the fixed price. VAT is added at the standard rate.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Headroom above the opening and which track type will suit it
- Yard gradient and the slope of the approach to the dock
- Working hours, shift patterns and windows for out-of-hours work
- Scope to convert ground-level doors into docks or add lift tables
- Whether planning, building control or a building warrant may be needed
- Traffic routes for vehicles and separation of pedestrians
Options to discuss
Bay upgrade package
A new insulated door, shelter or seal, bumpers and safety equipment on a bay whose pit and structure are still sound, bringing it up to current standards.
Dock lift conversion
A scissor lift table at the existing door raises goods to trailer height, avoiding yard excavation where space, levels or ground conditions rule out a ramp.
Planning, building control and safety law in England
Lift tables and dock lifts in Brighton may fall under LOLER, with thorough examination at least every 12 months, or every 6 months where people are lifted. It depends on the equipment and how it is used, and your insurer or competent person will confirm. Dock levellers are usually treated as work equipment under PUWER. We check what applies at survey.
Questions about loading bay conversions in Brighton
Will you deal with building control and planning for a project in Brighton?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
How long does installation take at a site in Brighton?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Brighton, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
How long does a loading bay conversion take?
The length of a conversion depends mainly on the civils, concrete curing and any approvals needed before work starts. Upgrade-only projects are much quicker than full conversions. We set out the programme for each bay in writing with the quote, so you can plan temporary loading.
Do I need a new door when converting a bay?
Not always. If the opening stays the same size and the door is in good condition, it can sometimes be kept. Where the opening changes or the door is old and uninsulated, a new door is usually included, and in England it should meet the Approved Document L limiting U-value for large doors.
Loading bay conversions and upgrades near Brighton
We also cover towns near Brighton, including Hove (1 mile), Portslade (3 miles) and Rottingdean (4 miles). Each has its own page with the same services and process.
Other loading bay services in Brighton
Full guide to loading bay conversions · Everything we do in Brighton
Request a quote for your loading bay in Brighton, attaching photos of the dock, the equipment and any damage.