An inflatable dock shelter is a dock shelter with air-filled fabric cushions at the top and sides of the opening, kept deflated and close to the building until a trailer has reversed in. A fan then inflates the cushions so they press against the trailer roof and sides, giving a close seal that adapts to different trailer widths and heights, and deflates again before the trailer leaves.
What should sites in Moray consider?
When a chilled dock in Moray sees condensation and ice around the door, the seal at the trailer is often where improvement starts. Pharmaceutical distributors around Moray working to tight temperature limits may want the close seal an inflatable shelter gives during every load.
Mixed fleets arriving at a cold store in Moray, from rigids to double-deck trailers, are exactly the situation inflatable cushions are designed for.
Before anything is ordered, we visit your site in Moray for a free survey and then send a written quote with a fixed price. From that point we manage the installation, coordinating delivery, access and any other trades. Fitting is done by specialist installation engineers engaged and managed by us, at times that suit your operation, including out of hours where agreed. You get a tested installation, a demonstration for your team and the manufacturer documentation.
What safety rules affect inflatable dock shelters?
An inflatable shelter is powered dock equipment, so it must be suitable, maintained and correctly marked, and it should be controlled so a trailer cannot pull away with the cushions inflated around it.
- Work equipment: PUWER 1998 in Great Britain and PUWER (Northern Ireland) 1999 require it to be maintained in a safe condition and inspected where deterioration could lead to danger.
- Marking: in Great Britain powered dock equipment may carry the UKCA or the CE mark. For Northern Ireland, the CE mark or CE with UKNI applies.
- Drive-away: HSE workplace transport guidance (HSG136), followed by HSENI in Northern Ireland, calls for safeguards against drivers driving away too early, such as traffic lights, vehicle or trailer restraints, or keeping keys until it is safe. Linking deflation to these controls protects both the cushions and the driver.
- Regulator: HSE in Great Britain and HSENI in Northern Ireland.
A vehicle restraint interlocked with the shelter and door is a common way to make the whole sequence dependable.
What is involved in installing an inflatable dock shelter?
Installing an inflatable shelter involves fixing a steel frame to the building around the dock door, mounting the cushions and fan, and wiring the controls, usually over one to two days per bay.
- The wall is checked and fixing points or a subframe prepared.
- The frame is fixed from powered access equipment in the yard.
- Top and side cushions are fitted, with protective covers where specified.
- The fan unit is mounted and the control panel wired, including interlocks to the door, leveller or restraint.
- Inflation, deflation and cushion retraction are tested with a trailer in the bay.
You will need to provide a clear yard area in front of the bay, take the bay out of use and arrange a power supply near the door, or ask us to include one. At cold stores we plan the work with the dock door kept closed, so the store stays at temperature while the shelter goes up outside.
Towns we cover in Moray
Below is a list of towns in Moray for inflatable dock shelters. Each page explains our approach for sites in that town.
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
What do the rules in Scotland mean for the work?
Energy standards for buildings in Scotland are set out in Section 6 of the Building Standards Technical Handbook. For new or replacement loading bay doors in Moray, we confirm the figure that applies to your project and check what applies at survey, rather than relying on rules written for elsewhere in the UK.
Questions
Is VAT included in your guide prices for inflatable dock shelters?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Moray as everywhere else: for inflatable dock shelters, it is £6,800 to £12,800 per shelter, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Which building and safety rules apply to a site in Moray?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Moray, we check what applies at survey and design to it.
Will we need to change the rest of the dock?
Usually not. Most inflatable shelters fit around an existing door opening, though the leveller, bumpers and door controls are reviewed so the cushions clear them and the interlocks work. Where the wall cannot carry the frame, a subframe is added. We confirm what is needed at survey.
Do the cushions touch the trailer as it reverses in?
No, the cushions stay deflated and pulled back against the building while the trailer reverses in, so there is no rubbing as it docks. They inflate only once the trailer is in position and secured, which reduces wear on the fabric compared with foam seals and curtain shelters.
Other services in Moray
Full guide to inflatable dock shelters · All loading bay services in Moray