- Location
- Berkhamsted, Hertfordshire
- Main postcode district
- HP4
- Nearby (straight line)
- Chesham (4 miles), Hemel Hempstead (5 miles) and Amersham (7 miles)
- Survey and quote
- Free, with a fixed written quote
An inflatable dock shelter is a dock shelter with air-filled fabric cushions at the top and sides of the opening, kept deflated and close to the building until a trailer has reversed in. A fan then inflates the cushions so they press against the trailer roof and sides, giving a close seal that adapts to different trailer widths and heights, and deflates again before the trailer leaves.
Is this right for your site in Berkhamsted?
Driving rain and wind at an open bay in Berkhamsted can wear cushion fabric, so a protective outer cover is worth considering on exposed docks. Specifying a new temperature-controlled warehouse in Berkhamsted is the ideal time to design inflatable shelters in with the doors and levellers, so controls are integrated from the start.
Operators replacing foam seals in Berkhamsted that keep wearing out against ill-fitting trailers may find an inflatable shelter suffers far less rubbing.
Before anything is ordered, we visit your site in Berkhamsted for a free survey and then send a written quote with a fixed price. From that point we manage the installation, coordinating delivery, access and any other trades. Fitting is done by specialist installation engineers engaged and managed by us, at times that suit your operation, including out of hours where agreed. You get a tested installation, a demonstration for your team and the manufacturer documentation.
How much does an inflatable dock shelter cost?
An inflatable dock shelter typically costs £6,800 to £12,800 per shelter, excluding VAT, supply and fit. It costs more than a curtain shelter or foam seal because of its cushions, fan and controls, and the closer seal it gives.
Costs are driven mainly by:
- Size: door width and height, and the range of trailers to be sealed.
- Cushion layout: a top cushion only, or top and side cushions.
- Fan and controls: standalone push-button control or full integration with the door, leveller and restraint.
- Frame and covers: the steel frame and any protective outer curtains.
- Cold store features: insulated frames or heating where ice is a concern.
- Site work: wall fixings, power supply, powered access equipment and removal of an old shelter or seal.
We fix the price in the written quote after a free site survey, which also confirms whether your trailer range suits an inflatable shelter.
What is involved in installing an inflatable dock shelter?
Installing an inflatable shelter involves fixing a steel frame to the building around the dock door, mounting the cushions and fan, and wiring the controls, usually over one to two days per bay.
- The wall is checked and fixing points or a subframe prepared.
- The frame is fixed from powered access equipment in the yard.
- Top and side cushions are fitted, with protective covers where specified.
- The fan unit is mounted and the control panel wired, including interlocks to the door, leveller or restraint.
- Inflation, deflation and cushion retraction are tested with a trailer in the bay.
You will need to provide a clear yard area in front of the bay, take the bay out of use and arrange a power supply near the door, or ask us to include one. At cold stores we plan the work with the dock door kept closed, so the store stays at temperature while the shelter goes up outside.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What does the free survey cover?
- Wheel guide positions and yard markings for reversing vehicles
- Escape routes and pedestrian doors close to the bay
- Drainage on recessed or sloping dock approaches
- How drivers are prevented from pulling away too early
- Power supply at each bay, including three-phase availability
- Gaps around trailers where heated or chilled air escapes
Options to discuss
Protective outer covers
Hard-wearing covers over the cushions that shield the fabric from weather, sunlight and trailer contact, extending cushion life on exposed docks.
Top cushion only
A single inflatable cushion across the top of the opening, paired with fixed side pads or curtains, for docks where trailer heights vary more than widths.
What do the rules in England mean for the work?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Berkhamsted. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about inflatable dock shelters in Berkhamsted
Is VAT included in your guide prices for inflatable dock shelters?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Hertfordshire as everywhere else: for inflatable dock shelters, it is £6,800 to £12,800 per shelter, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Berkhamsted, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
How do you price inflatable dock shelters for a site in Berkhamsted?
Guide budgets for supply and fit are £6,800 to £12,800 per shelter, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
What happens to an inflatable shelter if the power fails?
If the power fails, the fan stops and the cushions gradually deflate, so the trailer can leave once loading has been brought to a safe end. At a cold store, the dock door should be closed by hand where possible to protect the store. We explain the power failure routine at handover.
Do the cushions touch the trailer as it reverses in?
No, the cushions stay deflated and pulled back against the building while the trailer reverses in, so there is no rubbing as it docks. They inflate only once the trailer is in position and secured, which reduces wear on the fabric compared with foam seals and curtain shelters.
Inflatable dock shelters near Berkhamsted
Other towns within reach of Berkhamsted on our coverage list include Chesham (4 miles), Hemel Hempstead (5 miles) and Amersham (7 miles), all covered on the same terms.
Other loading bay services in Berkhamsted
Full guide to inflatable dock shelters · Everything we do in Berkhamsted
Get in touch about loading bay doors and dock equipment in Berkhamsted: call, email or use the quote tool.