- Location
- Milford Haven, Dyfed
- Main postcode district
- SA73
- Nearby (straight line)
- Pembroke Dock (4 miles) and Haverfordwest (7 miles)
- Survey and quote
- Free, with a fixed written quote
An inflatable dock shelter is a dock shelter with air-filled fabric cushions at the top and sides of the opening, kept deflated and close to the building until a trailer has reversed in. A fan then inflates the cushions so they press against the trailer roof and sides, giving a close seal that adapts to different trailer widths and heights, and deflates again before the trailer leaves.
What should sites in Milford Haven consider?
Mixed fleets arriving at a cold store in Milford Haven, from rigids to double-deck trailers, are exactly the situation inflatable cushions are designed for. Fresh produce cooled at a packhouse in Milford Haven stays colder during loading when the gap around the trailer is sealed by inflated cushions.
Specifying a new temperature-controlled warehouse in Milford Haven is the ideal time to design inflatable shelters in with the doors and levellers, so controls are integrated from the start.
Any project involving inflatable dock shelters at a working site in Milford Haven takes planning. We survey free of charge, quote a fixed price in writing, and then agree a programme that keeps as much of the dock running as possible. Specialist installation engineers carry out the work under our management, out of hours if that suits you better. On completion we test each item, show your team how it operates and leave the documentation with you.
Inflatable shelter, curtain shelter or dock seal: which suits a cold chain dock?
For a cold chain dock that receives trailers of different sizes, an inflatable shelter usually gives the best balance of close sealing and flexibility. A dock seal can match it on a uniform fleet, while a curtain shelter is better suited to ambient bays.
- Inflatable shelter: cushions adapt to each trailer's width and height and seal close to the body, with the full opening left clear.
- Dock seal: a tight, lower-cost seal when every trailer is the same size, but it can leave gaps on other vehicles and the pads can intrude into the opening.
- Curtain shelter: flexible and robust, but leaves small gaps that matter more at chilled and frozen docks.
Inflatables also stand clear of the trailer until it has docked, avoiding the rubbing that wears foam pads and curtains. The trade-off is the fan and controls, which need power and servicing. For frozen docks we specify the shelter alongside cold store dock doors so the two work together.
What maintenance does an inflatable dock shelter need?
An inflatable shelter needs regular checks on its fabric, fan and controls, because a puncture or a weak fan stops it sealing properly. Planned servicing catches most faults before they affect the cold chain.
- Cushion fabric: inspect for punctures, abrasion and failed seams, and patch or replace cushions as needed.
- Fan unit: check filters, motor and airflow so the cushions inflate fully and promptly.
- Retraction system: straps, weights or springs must pull the cushions back clear of the trailer.
- Controls and interlocks: confirm the sequence with the door, leveller and restraint still works.
- Frame and fixings: look for impact damage and corrosion.
Snow and ice on the top cushion can stop it retracting, so a check before winter is worthwhile. Service and repair visits are chargeable, and the price is agreed before anyone attends.
The same published guide range applies across Wales; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Traffic routes for vehicles and separation of pedestrians
- Escape routes and pedestrian doors close to the bay
- Power supply at each bay, including three-phase availability
- How often each door cycles during a typical shift
- Yard gradient and the slope of the approach to the dock
- Dock height and the mix of trailers you load
Options to discuss
Interlocked controls
Controls linked to the door, leveller and restraint so the shelter inflates before the door opens and deflates only once it has closed.
Top cushion only
A single inflatable cushion across the top of the opening, paired with fixed side pads or curtains, for docks where trailer heights vary more than widths.
What do the rules in Wales mean for the work?
Equipment fitted in Wales may carry the UKCA or the CE mark. For each door, leveller or shelter installed in Milford Haven, we hand over the documentation that comes with it. Permissions are never assumed either way: whether planning permission or Building Regulations approval is needed, we check what applies at survey and tell you before dates are agreed.
Questions about inflatable dock shelters in Milford Haven
Can you work outside our normal operating hours in Milford Haven?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
How do you price inflatable dock shelters for a site in Milford Haven?
Guide budgets for supply and fit are £6,800 to £12,800 per shelter, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
Will you deal with building control and planning for a project in Milford Haven?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Do the cushions touch the trailer as it reverses in?
No, the cushions stay deflated and pulled back against the building while the trailer reverses in, so there is no rubbing as it docks. They inflate only once the trailer is in position and secured, which reduces wear on the fabric compared with foam seals and curtain shelters.
What happens to an inflatable shelter if the power fails?
If the power fails, the fan stops and the cushions gradually deflate, so the trailer can leave once loading has been brought to a safe end. At a cold store, the dock door should be closed by hand where possible to protect the store. We explain the power failure routine at handover.
Inflatable dock shelters near Milford Haven
Distances are measured from Milford Haven. Nearby towns we cover include Pembroke Dock (4 miles) and Haverfordwest (7 miles), and other towns in the area are covered too.
Other loading bay services in Milford Haven
Full guide to inflatable dock shelters · Everything we do in Milford Haven
Start your enquiry for Milford Haven through the quote tool. A few photos and approximate sizes help us respond with something useful.