- Location
- Weston-super-Mare, Somerset
- Main postcode district
- BS23
- Nearby (straight line)
- Burnham-on-Sea (7 miles), Clevedon (8 miles) and Penarth (11 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
How does this suit sites in Weston-super-Mare?
Yards that are open to the weather in Weston-super-Mare may need a wind-reinforced build, because a standard internal high-speed door is not designed for gusts at an external opening. Manufacturers around Weston-super-Mare moving work in progress between production and dispatch can use high-speed doors to stop dust and draughts crossing departments.
Whether your site in Weston-super-Mare is a new build or an older unit, we survey the opening, traffic and power before recommending any high-speed door.
Step one is a survey at your site in Weston-super-Mare, which costs nothing and carries no obligation. Step two is a written quote with a fixed price and a clear scope. Step three is installation, scheduled around your operation and carried out by specialist installation engineers working under our management, including evenings or weekends if agreed. Step four is handover, when the equipment is tested in front of you and the paperwork is passed over.
What does a high-speed dock door cost, and why does the price vary so much?
A high-speed dock door typically costs £6,500 to £14,500 per door, excluding VAT, supply and fit. The range is wide because each door is built to order, and an internal door between two zones is a very different product from one facing an exposed yard.
The main things that move the price are:
- Size and wind exposure: large external openings need reinforced curtains, wind bars or belts and heavier side frames.
- Curtain type: single-skin fabric costs less than an insulated double-skin curtain.
- Self-repair and breakaway features: worth paying for wherever forklifts pass through.
- Activation: radar, induction loops or pull cords, and how many control points are needed.
- Interlocks: links to an outer door, a leveller or traffic lights.
- Site works: power supply, removing an old door or strip curtain, and access equipment.
Our loading bay costs guide sets these figures alongside other dock equipment. After a free site survey you receive a fixed written price.
What does a high-speed door installation need from our site?
A high-speed door installation needs a sound opening to fix the side frames to, a suitable power supply near the door, and the opening taken out of use on the day of fitting.
Before we attend, please make sure:
- a dedicated supply with a local isolator is in place near the door head, or is included in our quote,
- the floor at the threshold is level, as the bottom edge needs a consistent landing,
- stock, racking and vehicles are cleared from both sides of the opening,
- your team has agreed where push buttons, pull cords or radar sensors should sit, based on traffic routes.
On site, engineers working under our management fit the frames and drive unit, hang the curtain, wire the control panel and light curtain, then set opening heights and speeds. Where the door sits behind an existing sectional door, we also wire the interlock so the two doors work in sequence.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Lighting inside trailers and at the dock face
- Condition of any existing leveller pit, kerb angles and pit drainage
- Scope to convert ground-level doors into docks or add lift tables
- How drivers are prevented from pulling away too early
- Temperature requirements for chilled, frozen or ambient goods
- Age and condition of the equipment already in place
Options to discuss
Self-repairing curtain
If a forklift strikes the door, the curtain or bottom bar pulls out of the side guides without damage and re-engages on the next cycle, keeping the opening in use.
Insulated double-skin curtain
Two layers of fabric with an air gap or insulation between them, reducing heat or chill loss at openings between temperature zones or at external docks.
Which rules apply in England?
Workplace safety in England is regulated by HSE. For a loading bay in Weston-super-Mare, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about high-speed dock doors in Weston-super-Mare
Can you work alongside our main contractor on a new build in Weston-super-Mare?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Will you deal with building control and planning for a project in Weston-super-Mare?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Weston-super-Mare, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Do high-speed doors help with temperature control?
Yes, by cutting the time the opening is left open, a high-speed door reduces the warm or chilled air that escapes. It closes behind each forklift instead of standing open between movements. An insulated curtain adds some thermal resistance, but the main gain comes from shorter open times rather than the curtain itself.
How often should a high-speed door be serviced?
Service frequency should follow how hard the door works, and a busy high-speed door usually needs more visits than a quiet sectional door. We agree a schedule based on cycles per day, the manufacturer's recommendations and any history of impacts. Every visit should include a check of the light curtain, photocells and bottom edge.
High-speed dock doors near Weston-super-Mare
Sites close to Weston-super-Mare get the same service, including those in Burnham-on-Sea (7 miles), Clevedon (8 miles) and Penarth (11 miles), with every job run the same way.
Other loading bay services in Weston-super-Mare
Full guide to high-speed dock doors · Everything we do in Weston-super-Mare
Start your enquiry for Weston-super-Mare through the quote tool. A few photos and approximate sizes help us respond with something useful.