High-speed dock doors in Hinckley

Location: Hinckley, Leicestershire
Main postcode district: LE10
Nearby (straight line): Earl Shilton (4 miles), Nuneaton (4 miles) and Bedworth (6 miles)
Survey and quote: Free, with a fixed written quote

High-speed dock doors, in short

A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.

How does this suit sites in Hinckley?

Yards that are open to the weather in Hinckley may need a wind-reinforced build, because a standard internal high-speed door is not designed for gusts at an external opening. A warehouse in Hinckley running long shifts with constant forklift traffic puts a lot of cycles through a door, so the drive and its duty rating need to suit.

Busy cross-dock and parcel operations in Hinckley can use a high-speed door behind the main dock door to keep traffic flowing while limiting the time the bay stands open.

Any project involving high-speed dock doors at a working site in Hinckley takes planning. We survey free of charge, quote a fixed price in writing, and then agree a programme that keeps as much of the dock running as possible. Specialist installation engineers carry out the work under our management, out of hours if that suits you better. On completion we test each item, show your team how it operates and leave the documentation with you.

Which safety rules and standards apply to a high-speed door?

A high-speed door is a power-operated door, so it must protect people from being struck or trapped, and it should be designed and tested to the product and safety-in-use standards for powered doors.

Workplace law: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 in Great Britain, and the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993, require powered doors to have suitable and effective features to prevent trapping. Where needed for health or safety, the door must be operable by hand unless it opens automatically on power failure.
Standards: BS EN 13241 is the product standard for industrial doors, and BS EN 12453 covers safety in use of power-operated doors, including test methods.
Marking: in Great Britain the door may carry the UKCA or the CE mark. In Northern Ireland the CE mark, or CE with UKNI, applies.

In practice that means a light curtain or photocells across the opening, a safe bottom edge and a manual release or crank. HSE enforces these duties in Great Britain, and HSENI in Northern Ireland.

What does a high-speed dock door cost, and why does the price vary so much?

A high-speed dock door typically costs £6,500 to £14,500 per door, excluding VAT, supply and fit. The range is wide because each door is built to order, and an internal door between two zones is a very different product from one facing an exposed yard.

The main things that move the price are:

Size and wind exposure: large external openings need reinforced curtains, wind bars or belts and heavier side frames.
Curtain type: single-skin fabric costs less than an insulated double-skin curtain.
Self-repair and breakaway features: worth paying for wherever forklifts pass through.
Activation: radar, induction loops or pull cords, and how many control points are needed.
Interlocks: links to an outer door, a leveller or traffic lights.
Site works: power supply, removing an old door or strip curtain, and access equipment.

Our loading bay costs guide sets these figures alongside other dock equipment. After a free site survey you receive a fixed written price.

Guide price, Hinckley

£6,500–£14,500 per door, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

Survey checklist for your dock

Temperature requirements for chilled, frozen or ambient goods
Bumper position and wear or damage on the dock face
Control positions, isolators and any existing interlocks
Traffic routes for vehicles and separation of pedestrians
Power supply at each bay, including three-phase availability
Clear opening width and height for each door

Options to discuss

Vision panels

Clear sections set into the curtain so drivers and pedestrians can see each other through the closed door, which matters where forklift routes cross walkways.

Self-repairing curtain

If a forklift strikes the door, the curtain or bottom bar pulls out of the side guides without damage and re-engages on the next cycle, keeping the opening in use.

Planning, building control and safety law in England

Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Hinckley. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.

Questions about high-speed dock doors in Hinckley

What details do you need from us to quote for high-speed dock doors?

To get started, send the site address in Hinckley, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Can you work alongside our main contractor on a new build in Hinckley?

Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.

What warranty comes with new loading bay equipment?

New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Hinckley site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.

Is a high-speed door secure enough to be the only door at a dock?

Usually not on an external dock. Fabric curtains are designed for speed and draught control rather than security, so most sites keep an insulated sectional door or shutter on the outside for closing at night. Some rigid high-speed designs give more security, and we can discuss them where a single door is needed.

Can a high-speed door be opened in a power cut?

Yes, a high-speed door should have a manual release, crank or counterbalance so it can be opened if the power fails. This reflects the workplace rule that powered doors must be operable by hand where needed for health or safety, unless they open automatically on power failure.

High-speed dock doors near Hinckley

We also cover towns near Hinckley, including Earl Shilton (4 miles), Nuneaton (4 miles) and Bedworth (6 miles). Each has its own page with the same services and process.

Other loading bay services in Hinckley

Full guide to high-speed dock doors · Everything we do in Hinckley

Use the quote tool to tell us about the doors, levellers or shelters at your Hinckley site, and we will be in touch to arrange the next step.