- Location
- Tonbridge, Kent
- Main postcode district
- TN9
- Nearby (straight line)
- Royal Tunbridge Wells (4 miles), Sevenoaks (6 miles) and Crowborough (10 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
Is this right for your site in Tonbridge?
Busy cross-dock and parcel operations in Tonbridge can use a high-speed door behind the main dock door to keep traffic flowing while limiting the time the bay stands open. Yards that are open to the weather in Tonbridge may need a wind-reinforced build, because a standard internal high-speed door is not designed for gusts at an external opening.
Manufacturers around Tonbridge moving work in progress between production and dispatch can use high-speed doors to stop dust and draughts crossing departments.
Step one is a survey at your site in Tonbridge, which costs nothing and carries no obligation. Step two is a written quote with a fixed price and a clear scope. Step three is installation, scheduled around your operation and carried out by specialist installation engineers working under our management, including evenings or weekends if agreed. Step four is handover, when the equipment is tested in front of you and the paperwork is passed over.
Should a high-speed door replace our strip curtain or work alongside our dock door?
At very busy openings a high-speed door often replaces a strip curtain, and at external docks it usually works alongside a slower insulated door rather than replacing it.
Strip curtains are inexpensive, but they slow forklifts, scratch quickly and can hide a pedestrian on the other side. A high-speed door clears the opening fully, closes again within seconds and keeps a clear view through its vision panels. See PVC strip curtains if you are weighing up the two.
At external docks, a common arrangement is:
- an insulated sectional door on the outside for security and closing at night,
- a high-speed door just inside it for daytime traffic,
- an interlock so the high-speed door only runs when the outer door is open.
This pairing keeps the building secure out of hours while cutting the time the opening stands open during the working day.
Can a high-speed door be used on an external dock opening?
Yes, provided it is specified for the wind and weather the opening faces. Many high-speed doors are designed for internal openings, so an external dock door needs a reinforced build.
- Wind resistance: external doors use stronger curtains, horizontal wind bars or tensioned belts, and deeper side guides so the curtain stays put in gusts.
- Insulation: a double-skin curtain reduces heat loss, though fabric does not insulate as well as a thick sectional door.
- Security: fabric doors are not security doors, so many sites keep a sectional door or shutter outside for closing at night.
- Impact protection: a self-repairing curtain re-engages after a knock, which matters at a busy dock.
For openings that are mainly internal, such as between goods-in and a chilled zone, a lighter single-skin door with vision panels is usually enough. We match the build to the exposure at survey.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Access for deliveries, cranes or lifting equipment during installation
- Forklift and pallet truck loads crossing the leveller platform
- Scope to convert ground-level doors into docks or add lift tables
- Gaps around trailers where heated or chilled air escapes
- Power supply at each bay, including three-phase availability
- Dock height and the mix of trailers you load
Options to discuss
Vision panels
Clear sections set into the curtain so drivers and pedestrians can see each other through the closed door, which matters where forklift routes cross walkways.
Self-repairing curtain
If a forklift strikes the door, the curtain or bottom bar pulls out of the side guides without damage and re-engages on the next cycle, keeping the opening in use.
What do the rules in England mean for the work?
In England, Approved Document L (2021) sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. That shapes door specification for sites in Tonbridge, so we confirm the requirement for your project and check what applies at survey before recommending a door.
Questions about high-speed dock doors in Tonbridge
Which building and safety rules apply to a site in Tonbridge?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Tonbridge, we check what applies at survey and design to it.
Is the site survey in Tonbridge free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Is VAT included in your guide prices for high-speed dock doors?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Kent as everywhere else: for high-speed dock doors, it is £6,500 to £14,500 per door, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
What happens if a forklift hits a high-speed door?
On a door with a self-repairing curtain or breakaway bottom bar, the curtain is pushed out of its guides and re-engages on the next cycle, usually with no repair needed. Repeated hard impacts still wear the curtain and guides, so knocks should be logged and checked at the next service visit.
How fast does a high-speed door open?
Many dock and internal high-speed doors open at around 1 to 2 metres per second, so a typical opening clears in a few seconds. Speed depends on the size, the drive and whether the door is built for wind. Closing speed is usually set slower than opening for safety, and both are adjusted at handover.
High-speed dock doors near Tonbridge
We also cover towns near Tonbridge, including Royal Tunbridge Wells (4 miles), Sevenoaks (6 miles) and Crowborough (10 miles). Each has its own page with the same services and process.
Other loading bay services in Tonbridge
Full guide to high-speed dock doors · Everything we do in Tonbridge
Call us or request a quote online to talk through loading bay work at your site in Tonbridge.