- Location
- Deal, Kent
- Main postcode district
- CT14
- Nearby (straight line)
- Dover (8 miles), Ramsgate (8 miles) and Broadstairs (9 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
Why do sites in Deal choose this?
Where a goods-in area in Deal borders a chilled zone, a fast fabric door helps hold the temperature line without slowing forklift movements between the two. Food producers in Deal with hygiene zones can choose smooth, easily cleaned curtains and frames that suit washdown areas next to the loading dock.
Whether your site in Deal is a new build or an older unit, we survey the opening, traffic and power before recommending any high-speed door.
Keeping the dock running is usually the first concern, so we plan around it. After a free survey of your Deal site and a written quote at a fixed price, we agree when each bay can be released and whether any work should happen out of hours. Specialist installation engineers working under our management then fit the equipment, and we test it and hand over the documentation before the bay goes back into use.
Should a high-speed door replace our strip curtain or work alongside our dock door?
At very busy openings a high-speed door often replaces a strip curtain, and at external docks it usually works alongside a slower insulated door rather than replacing it.
Strip curtains are inexpensive, but they slow forklifts, scratch quickly and can hide a pedestrian on the other side. A high-speed door clears the opening fully, closes again within seconds and keeps a clear view through its vision panels. See PVC strip curtains if you are weighing up the two.
At external docks, a common arrangement is:
- an insulated sectional door on the outside for security and closing at night,
- a high-speed door just inside it for daytime traffic,
- an interlock so the high-speed door only runs when the outer door is open.
This pairing keeps the building secure out of hours while cutting the time the opening stands open during the working day.
What does a high-speed door installation need from our site?
A high-speed door installation needs a sound opening to fix the side frames to, a suitable power supply near the door, and the opening taken out of use on the day of fitting.
Before we attend, please make sure:
- a dedicated supply with a local isolator is in place near the door head, or is included in our quote,
- the floor at the threshold is level, as the bottom edge needs a consistent landing,
- stock, racking and vehicles are cleared from both sides of the opening,
- your team has agreed where push buttons, pull cords or radar sensors should sit, based on traffic routes.
On site, engineers working under our management fit the frames and drive unit, hang the curtain, wire the control panel and light curtain, then set opening heights and speeds. Where the door sits behind an existing sectional door, we also wire the interlock so the two doors work in sequence.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Scope to convert ground-level doors into docks or add lift tables
- Drainage on recessed or sloping dock approaches
- How drivers are prevented from pulling away too early
- Wheel guide positions and yard markings for reversing vehicles
- How often each door cycles during a typical shift
- Dock height and the mix of trailers you load
Options to discuss
Radar, loop and pull-cord activation
Radar opens the door for approaching forklifts, induction loops respond to vehicles, and pull cords let drivers trigger the door without leaving the truck.
Self-repairing curtain
If a forklift strikes the door, the curtain or bottom bar pulls out of the side guides without damage and re-engages on the next cycle, keeping the opening in use.
What do the rules in England mean for the work?
Sites in Deal fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about high-speed dock doors in Deal
Is the site survey in Deal free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Will you deal with building control and planning for a project in Deal?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Can you work outside our normal operating hours in Deal?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
How fast does a high-speed door open?
Many dock and internal high-speed doors open at around 1 to 2 metres per second, so a typical opening clears in a few seconds. Speed depends on the size, the drive and whether the door is built for wind. Closing speed is usually set slower than opening for safety, and both are adjusted at handover.
Can a high-speed door be opened in a power cut?
Yes, a high-speed door should have a manual release, crank or counterbalance so it can be opened if the power fails. This reflects the workplace rule that powered doors must be operable by hand where needed for health or safety, unless they open automatically on power failure.
High-speed dock doors near Deal
Businesses outside Deal may find their nearest town in this list: Dover (8 miles), Ramsgate (8 miles) and Broadstairs (9 miles). Each page covers doors, docks, repairs and servicing.
Other loading bay services in Deal
Full guide to high-speed dock doors · Everything we do in Deal
Send a few photos of the dock and a short description of the problem, and we will come back to you about your Deal site.