- Location
- Hereford, Herefordshire
- Main postcode district
- HR1
- Nearby (straight line)
- Ross-on-Wye (11 miles), Leominster (12 miles) and Ledbury (12 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
What should sites in Hereford consider?
Manufacturers around Hereford moving work in progress between production and dispatch can use high-speed doors to stop dust and draughts crossing departments. Yards that are open to the weather in Hereford may need a wind-reinforced build, because a standard internal high-speed door is not designed for gusts at an external opening.
Food producers in Hereford with hygiene zones can choose smooth, easily cleaned curtains and frames that suit washdown areas next to the loading dock.
We never ask you to commit before you have a fixed price. A free survey at your Hereford site comes first, followed by a written quote. When the order goes ahead, we plan the installation around your operation, book any out-of-hours working you need and manage the specialist installation engineers on site. The job ends with a full test, a run-through for the people who will use the equipment and a set of handover documents.
Which safety rules and standards apply to a high-speed door?
A high-speed door is a power-operated door, so it must protect people from being struck or trapped, and it should be designed and tested to the product and safety-in-use standards for powered doors.
- Workplace law: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 in Great Britain, and the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993, require powered doors to have suitable and effective features to prevent trapping. Where needed for health or safety, the door must be operable by hand unless it opens automatically on power failure.
- Standards: BS EN 13241 is the product standard for industrial doors, and BS EN 12453 covers safety in use of power-operated doors, including test methods.
- Marking: in Great Britain the door may carry the UKCA or the CE mark. In Northern Ireland the CE mark, or CE with UKNI, applies.
In practice that means a light curtain or photocells across the opening, a safe bottom edge and a manual release or crank. HSE enforces these duties in Great Britain, and HSENI in Northern Ireland.
What does a high-speed door installation need from our site?
A high-speed door installation needs a sound opening to fix the side frames to, a suitable power supply near the door, and the opening taken out of use on the day of fitting.
Before we attend, please make sure:
- a dedicated supply with a local isolator is in place near the door head, or is included in our quote,
- the floor at the threshold is level, as the bottom edge needs a consistent landing,
- stock, racking and vehicles are cleared from both sides of the opening,
- your team has agreed where push buttons, pull cords or radar sensors should sit, based on traffic routes.
On site, engineers working under our management fit the frames and drive unit, hang the curtain, wire the control panel and light curtain, then set opening heights and speeds. Where the door sits behind an existing sectional door, we also wire the interlock so the two doors work in sequence.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Whether planning, building control or a building warrant may be needed
- Headroom above the opening and which track type will suit it
- Bumper position and wear or damage on the dock face
- How often each door cycles during a typical shift
- Asbestos register and any other site hazard information
- How drivers are prevented from pulling away too early
Options to discuss
Radar, loop and pull-cord activation
Radar opens the door for approaching forklifts, induction loops respond to vehicles, and pull cords let drivers trigger the door without leaving the truck.
Self-repairing curtain
If a forklift strikes the door, the curtain or bottom bar pulls out of the side guides without damage and re-engages on the next cycle, keeping the opening in use.
Which rules apply in England?
Workplace safety in England is regulated by HSE. For a loading bay in Hereford, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about high-speed dock doors in Hereford
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Hereford site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Is the site survey in Hereford free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
How long does installation take at a site in Hereford?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
Do high-speed doors help with temperature control?
Yes, by cutting the time the opening is left open, a high-speed door reduces the warm or chilled air that escapes. It closes behind each forklift instead of standing open between movements. An insulated curtain adds some thermal resistance, but the main gain comes from shorter open times rather than the curtain itself.
What happens if a forklift hits a high-speed door?
On a door with a self-repairing curtain or breakaway bottom bar, the curtain is pushed out of its guides and re-engages on the next cycle, usually with no repair needed. Repeated hard impacts still wear the curtain and guides, so knocks should be logged and checked at the next service visit.
High-speed dock doors near Hereford
Businesses outside Hereford may find their nearest town in this list: Ross-on-Wye (11 miles), Leominster (12 miles) and Ledbury (12 miles). Each page covers doors, docks, repairs and servicing.
Other loading bay services in Hereford
Full guide to high-speed dock doors · Everything we do in Hereford
Get in touch about loading bay doors and dock equipment in Hereford: call, email or use the quote tool.