- Location
- Consett, County Durham
- Main postcode district
- DH8
- Nearby (straight line)
- Stanley (5 miles), Whickham (9 miles) and Blaydon-on-Tyne (9 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
How does this suit sites in Consett?
Food producers in Consett with hygiene zones can choose smooth, easily cleaned curtains and frames that suit washdown areas next to the loading dock. A warehouse in Consett running long shifts with constant forklift traffic puts a lot of cycles through a door, so the drive and its duty rating need to suit.
Yards that are open to the weather in Consett may need a wind-reinforced build, because a standard internal high-speed door is not designed for gusts at an external opening.
Our part of the job in Consett is to survey, quote and manage; the fitting itself is done by specialist installation engineers working under our management. The survey and the written quote are free. Once the fixed price is accepted, we agree dates that work around your deliveries and shifts, including out-of-hours working where needed. Every installation is tested before handover, and you receive the documentation for each item fitted.
What does a high-speed door installation need from our site?
A high-speed door installation needs a sound opening to fix the side frames to, a suitable power supply near the door, and the opening taken out of use on the day of fitting.
Before we attend, please make sure:
- a dedicated supply with a local isolator is in place near the door head, or is included in our quote,
- the floor at the threshold is level, as the bottom edge needs a consistent landing,
- stock, racking and vehicles are cleared from both sides of the opening,
- your team has agreed where push buttons, pull cords or radar sensors should sit, based on traffic routes.
On site, engineers working under our management fit the frames and drive unit, hang the curtain, wire the control panel and light curtain, then set opening heights and speeds. Where the door sits behind an existing sectional door, we also wire the interlock so the two doors work in sequence.
Should a high-speed door replace our strip curtain or work alongside our dock door?
At very busy openings a high-speed door often replaces a strip curtain, and at external docks it usually works alongside a slower insulated door rather than replacing it.
Strip curtains are inexpensive, but they slow forklifts, scratch quickly and can hide a pedestrian on the other side. A high-speed door clears the opening fully, closes again within seconds and keeps a clear view through its vision panels. See PVC strip curtains if you are weighing up the two.
At external docks, a common arrangement is:
- an insulated sectional door on the outside for security and closing at night,
- a high-speed door just inside it for daytime traffic,
- an interlock so the high-speed door only runs when the outer door is open.
This pairing keeps the building secure out of hours while cutting the time the opening stands open during the working day.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What does the free survey cover?
- Temperature requirements for chilled, frozen or ambient goods
- Lighting inside trailers and at the dock face
- Power supply at each bay, including three-phase availability
- Forklift and pallet truck loads crossing the leveller platform
- Wall and steel structure for door, shelter and bumper fixings
- How drivers are prevented from pulling away too early
Options to discuss
Wind-reinforced external build
Wind bars, tensioned belts and deeper guides keep the curtain in place at exposed external openings, so the door stays reliable when the yard is windy.
Insulated double-skin curtain
Two layers of fabric with an air gap or insulation between them, reducing heat or chill loss at openings between temperature zones or at external docks.
Planning, building control and safety law in England
Workplace safety in England is regulated by HSE. For a loading bay in Consett, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about high-speed dock doors in Consett
Is the site survey in Consett free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Is VAT included in your guide prices for high-speed dock doors?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in County Durham as everywhere else: for high-speed dock doors, it is £6,500 to £14,500 per door, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Consett, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Do high-speed doors help with temperature control?
Yes, by cutting the time the opening is left open, a high-speed door reduces the warm or chilled air that escapes. It closes behind each forklift instead of standing open between movements. An insulated curtain adds some thermal resistance, but the main gain comes from shorter open times rather than the curtain itself.
Can a high-speed door be opened in a power cut?
Yes, a high-speed door should have a manual release, crank or counterbalance so it can be opened if the power fails. This reflects the workplace rule that powered doors must be operable by hand where needed for health or safety, unless they open automatically on power failure.
High-speed dock doors near Consett
Looking beyond Consett? Our pages for Stanley (5 miles), Whickham (9 miles) and Blaydon-on-Tyne (9 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Consett
Full guide to high-speed dock doors · Everything we do in Consett
Call us or request a quote online to talk through loading bay work at your site in Consett.