Dock traffic lights are red and green signals mounted outside and inside a loading bay to tell the driver and dock staff when it is safe to move or load. Interlocks are control links that stop equipment operating out of sequence, for example preventing the door opening until the trailer is restrained, or the leveller operating until the door is fully open.
How does this suit sites in Shropshire?
Loading docks in Shropshire where drivers wait in their cabs for a hand signal can replace guesswork with a clear red and green light at every bay. Sites around Shropshire that run night shifts often find traffic lights easier for drivers to read than staff waving or knocking on the cab door.
New warehouses in Shropshire can have lights and interlocks wired in during the electrical fit-out, avoiding retrofit cabling and keeping every bay on one control standard.
We never ask you to commit before you have a fixed price. A free survey at your Shropshire site comes first, followed by a written quote. When the order goes ahead, we plan the installation around your operation, book any out-of-hours working you need and manage the specialist installation engineers on site. The job ends with a full test, a run-through for the people who will use the equipment and a set of handover documents.
How do inside and outside dock traffic lights work together?
Inside and outside dock lights always show opposite colours: when the driver sees red, dock staff see green, and the other way round. Each light is aimed at a different person, so each one only ever gives one instruction.
- Outside light, facing the driver: red means stay on the bay because loading is in progress; green means the bay is clear to leave or to reverse on to.
- Inside light, facing dock staff: green means the trailer is in place and it is safe to open the door and load; red means do not open the door or enter the trailer.
Lights can be switched in three main ways:
- Manually, by a switch beside the door, relying on dock staff to change it at the right moment.
- By door position, so opening the door automatically turns the outside light red.
- By the restraint, so the light only changes when the trailer is physically held.
Can traffic lights and interlocks be added to older loading bays?
Yes, traffic lights and interlocks can be added to most older loading bays, although some need new control panels before the interlocks can work.
- Manual doors: a door position switch can confirm the door is fully open or closed, which lets lights and leveller interlocks work even without a motor.
- Older powered doors and levellers: basic control boxes may not have connections for interlocks, so a combined bay panel can replace separate controls.
- Mixed equipment: doors and levellers from different suppliers can usually be brought under one interlock panel, so every bay works the same way.
Interlocks cannot make faulty equipment safe. If a door or leveller has a defect, it should be repaired before interlocks are added, and the survey will flag anything we find. Upgrading lights and interlocks at the same time as replacing a door or leveller is often the most economical moment to do it.
Towns we cover in Shropshire
We provide dock traffic lights and interlocks right across Shropshire. Pick the town closest to your site from the list below.
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
Regulations and approvals in England
Sites in Shropshire fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions
Will you deal with building control and planning for a project in Shropshire?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Shropshire, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Can you add lights and interlocks across a whole dock in one project?
Yes. A whole-dock project is usually phased bay by bay so most doors stay in use, and every bay ends up on the same control standard. That consistency makes training easier for staff and drivers, and it simplifies servicing because every bay behaves in the same way.
Which way round do the inside and outside lights work?
The inside and outside lights always show opposite colours. While a trailer is being loaded, the outside light is red so the driver stays put and the inside light is green so staff can work. When loading is finished and the door is closed, the inside light turns red and the outside light turns green for the driver.
Other services in Shropshire
Full guide to dock traffic lights and interlocks · All loading bay services in Shropshire