- Location
- Acton, Greater London
- Main postcode district
- W3
- Nearby (straight line)
- Park Royal (1 mile), Wembley (3 miles) and Greenford (4 miles)
- Survey and quote
- Free, with a fixed written quote
Dock traffic lights are red and green signals mounted outside and inside a loading bay to tell the driver and dock staff when it is safe to move or load. Interlocks are control links that stop equipment operating out of sequence, for example preventing the door opening until the trailer is restrained, or the leveller operating until the door is fully open.
Is this right for your site in Acton?
Whether your unit in Acton has one dock or twenty, the survey looks at each bay's existing controls before we quote a fixed price in writing. New warehouses in Acton can have lights and interlocks wired in during the electrical fit-out, avoiding retrofit cabling and keeping every bay on one control standard.
Distribution centres near Acton taking trailers from many different hauliers benefit from a signal every driver understands, regardless of language or familiarity with the site.
We never ask you to commit before you have a fixed price. A free survey at your Acton site comes first, followed by a written quote. When the order goes ahead, we plan the installation around your operation, book any out-of-hours working you need and manage the specialist installation engineers on site. The job ends with a full test, a run-through for the people who will use the equipment and a set of handover documents.
How do inside and outside dock traffic lights work together?
Inside and outside dock lights always show opposite colours: when the driver sees red, dock staff see green, and the other way round. Each light is aimed at a different person, so each one only ever gives one instruction.
- Outside light, facing the driver: red means stay on the bay because loading is in progress; green means the bay is clear to leave or to reverse on to.
- Inside light, facing dock staff: green means the trailer is in place and it is safe to open the door and load; red means do not open the door or enter the trailer.
Lights can be switched in three main ways:
- Manually, by a switch beside the door, relying on dock staff to change it at the right moment.
- By door position, so opening the door automatically turns the outside light red.
- By the restraint, so the light only changes when the trailer is physically held.
What happens on site when traffic lights and interlocks are fitted?
Fitting lights and interlocks is mainly electrical work, and each bay is out of use while its controls are connected and tested. Working bay by bay keeps the rest of the dock running.
- Fix the signals: the outside light is mounted on brackets at a height drivers can see, and the inside light beside the door.
- Run the cables: wiring is run in conduit or trunking between lights, sensors and control panels.
- Isolate and connect: the door and leveller supplies are isolated and locked off while the interlock wiring is connected, or a new bay panel is fitted.
- Test every sequence: each interlock is tested, including what happens if a step is attempted out of order.
- Brief staff: dock staff are shown the new sequence, and signs are fitted for drivers.
It helps if you can provide any electrical drawings for the dock, access to the distribution board, a person who can authorise isolations and an agreed order for releasing bays.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What does the free survey cover?
- Power supply at each bay, including three-phase availability
- Wall and steel structure for door, shelter and bumper fixings
- Dock height and the mix of trailers you load
- Gaps around trailers where heated or chilled air escapes
- Whether planning, building control or a building warrant may be needed
- Wind exposure at the dock, which affects door and shelter choice
Options to discuss
Full bay interlock panel
A single control panel that runs the door, leveller, restraint and shelter in the correct sequence, with indicators showing which step is active or blocked.
Standalone LED traffic lights
A red and green pair for each bay, one outside for the driver and one inside for dock staff, switched manually from a control beside the door.
Which rules apply in England?
Sites in Acton fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about dock traffic lights and interlocks in Acton
Which building and safety rules apply to a site in Acton?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Acton, we check what applies at survey and design to it.
Can you work outside our normal operating hours in Acton?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
What details do you need from us to quote for dock traffic lights and interlocks?
To get started, send the site address in Acton, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Can you add lights and interlocks across a whole dock in one project?
Yes. A whole-dock project is usually phased bay by bay so most doors stay in use, and every bay ends up on the same control standard. That consistency makes training easier for staff and drivers, and it simplifies servicing because every bay behaves in the same way.
Are dock traffic lights enough on their own to stop drive-away?
Traffic lights on their own are a signal, not a physical barrier, so they depend on drivers obeying them. HSE lists traffic lights among the measures against early drive-away, and many sites combine them with key or paperwork control or with a vehicle restraint. The right combination should come from your workplace transport risk assessment.
Dock traffic lights and interlocks near Acton
The same survey, quote and repair service is available in towns around Acton, such as Park Royal (1 mile), Wembley (3 miles) and Greenford (4 miles).
Other loading bay services in Acton
Full guide to dock traffic lights and interlocks · Everything we do in Acton
For a written price on loading bay work in Acton, request a quote and include photos of the bay if you can.