- Location
- Kingswood, Gloucestershire
- Main postcode district
- BS15
- Nearby (straight line)
- Mangotsfield (2 miles), Keynsham (3 miles) and Bristol (4 miles)
- Survey and quote
- Free, with a fixed written quote
Dock traffic lights are red and green signals mounted outside and inside a loading bay to tell the driver and dock staff when it is safe to move or load. Interlocks are control links that stop equipment operating out of sequence, for example preventing the door opening until the trailer is restrained, or the leveller operating until the door is fully open.
How does this suit sites in Kingswood?
Loading docks in Kingswood where drivers wait in their cabs for a hand signal can replace guesswork with a clear red and green light at every bay. Older docks in Kingswood with separate door and leveller controls can be brought into a proper sequence by adding interlocks that stop equipment working out of order.
New warehouses in Kingswood can have lights and interlocks wired in during the electrical fit-out, avoiding retrofit cabling and keeping every bay on one control standard.
For dock traffic lights and interlocks in Kingswood, we begin with a free site survey and a fixed written quote, so you know the scope and cost before committing. We take responsibility for managing the job, and specialist installation engineers carry it out under our supervision. Bays are taken out of use in a planned sequence so the rest of the dock keeps working, and evening or weekend work can be arranged. Each item is tested at handover and the documentation is left with you.
How much do dock traffic lights and interlocks cost?
Dock traffic lights and interlocks typically cost £650 to £3,400 per bay, supplied and fitted, excluding VAT. A pair of manually switched LED signals sits at the lower end, while a full interlock panel linking door, leveller, restraint and shelter sits towards the top.
What moves the price:
- Level of control: standalone lights, door-linked lights or a full interlocked sequence.
- Existing control panels: modern door and leveller panels often accept interlocks directly; older panels may need replacing with a combined bay panel.
- Sensors: door position switches, trailer presence sensors and restraint signals each add parts and wiring.
- Cable runs: distances between lights, panels and the power supply.
- Number of bays and timing: repeat bays reduce the cost per bay, while out-of-hours working adds to it.
These are guide budgets. After a free site survey we send a written quote, and that quote is the fixed price. VAT is added at the standard rate.
What does HSE guidance say about stopping drivers leaving too early?
HSE guidance (followed by HSENI in Northern Ireland) says there should be safeguards against drivers driving away from a loading bay too early, and it names traffic lights as one of the measures. Vehicle or trailer restraints, and the person in charge keeping keys or paperwork until it is safe, are the others listed in HSE's guide to workplace transport safety (HSG136) and its loading factsheet.
Traffic lights are a signal, not a physical barrier, so they work best as part of a clear procedure or alongside a restraint. Your risk assessment should decide the combination. In Northern Ireland the regulator is HSENI.
Interlocks also touch on door safety law. Under regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, or the Northern Ireland 1993 equivalent, powered doors need suitable and effective features to prevent them trapping anyone. Interlocks must never bypass those features, and door control work should respect BS EN 12453, the standard for safety in use of power-operated doors.
Read more in our guide to preventing drive-away and trailer creep.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Headroom above the opening and which track type will suit it
- Asbestos register and any other site hazard information
- Wall and steel structure for door, shelter and bumper fixings
- Dock height and the mix of trailers you load
- Control positions, isolators and any existing interlocks
- Power supply at each bay, including three-phase availability
Options to discuss
Trailer presence sensors
Sensors that detect a trailer on the bay, used to switch lights, enable the door or trigger an inflatable shelter where no restraint is fitted.
Standalone LED traffic lights
A red and green pair for each bay, one outside for the driver and one inside for dock staff, switched manually from a control beside the door.
Which rules apply in England?
Sites in Kingswood fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about dock traffic lights and interlocks in Kingswood
Can you work outside our normal operating hours in Kingswood?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Kingswood, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Can you work alongside our main contractor on a new build in Kingswood?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Can interlocks be fitted to a manual loading bay door?
Yes. A door position switch fitted to a manual door can confirm when it is fully open or fully closed. That signal lets the traffic lights change automatically and stops the leveller being raised until the door is out of the way.
Do traffic lights and interlocks need maintenance?
Yes. Lights, sensors and interlocks should be checked at each planned service visit, including testing the full sequence and confirming that steps attempted out of order are blocked. As part of the dock equipment they fall under PUWER, which requires work equipment to be maintained in a safe condition.
Dock traffic lights and interlocks near Kingswood
Looking beyond Kingswood? Our pages for Mangotsfield (2 miles), Keynsham (3 miles) and Bristol (4 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Kingswood
Full guide to dock traffic lights and interlocks · Everything we do in Kingswood
Use the quote tool to tell us about the doors, levellers or shelters at your Kingswood site, and we will be in touch to arrange the next step.