- Location
- Poulton-le-Fylde, Lancashire
- Main postcode district
- FY6
- Nearby (straight line)
- Blackpool (3 miles), Thornton-Cleveleys (3 miles) and Lytham St Annes (6 miles)
- Visit pricing
- Agreed in writing before we attend
Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.
Why do sites in Poulton-le-Fylde choose this?
Multi-bay sites near Poulton-le-Fylde often find several shelters in similar condition, so measuring and replacing curtains across the dock in one programme can reduce costs. Curtains tearing at the corners at docks in Poulton-le-Fylde can be a sign that taller or wider trailers are arriving than the shelter was sized for.
Exposed yards in Poulton-le-Fylde that catch strong winds can tear shelter curtains or strain frames, letting weather into the dock until parts are replaced.
Servicing and repairs work slightly differently from installations. Visits to sites in Poulton-le-Fylde are chargeable, and the price is set out in writing before anyone comes out. To help us prepare, send photos of the equipment and the fault. The engineer carries out the agreed work, flags anything else that needs attention and quotes it before touching it. Afterwards, a written report records the condition of each item.
Why is my dock shelter or seal letting in draughts?
A dock shelter or seal lets in draughts when the material that should press against the trailer is torn, worn, too short or no longer in the right place. Daylight around a docked trailer is the clearest sign.
- Torn or shrunk curtains: side curtains no longer overlap the trailer sides.
- Short head curtain: taller trailers than the shelter was sized for leave a gap across the top.
- Flattened seal pads: foam that has lost its spring no longer closes the gap.
- Worn pad covers: exposed foam soaks up water and breaks down faster.
- Bent frame: a retractable shelter frame that no longer returns square.
- Airbag or blower fault: inflatable shelters that inflate slowly or lose pressure.
- Trailer position: off-centre parking or worn bumpers that let trailers crush one side.
On chilled docks, gaps also show up as condensation, ice on the dock floor or frost around the door.
Do dock shelters and seals fall under PUWER?
Yes. Dock shelters and seals are work equipment under the Provision and Use of Work Equipment Regulations 1998 (PUWER), so they must be suitable, maintained in a safe condition and inspected where deterioration could lead to danger. In Northern Ireland the equivalent is PUWER (Northern Ireland) 1999.
Shelter and seal damage is often treated as a comfort or energy issue, but some faults are safety issues too:
- loose head curtains, top pads or fixings that could fall;
- bent or broken frame arms with sharp edges at head height;
- wet or icy dock floors caused by gaps around the trailer;
- electrical faults on inflatable shelter blowers.
The regulator is HSE in Great Britain and HSENI in Northern Ireland. Including shelters and seals in planned maintenance, and recording what is found, shows they are being kept in a safe condition. Problems found during servicing are quoted as repairs before any work is done.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Bay checks on a repair or service visit
- Previous service and inspection records, where available
- Door springs, cables and drums for wear or damage
- Control panels, push buttons and emergency stops
- Pit frame welds, platform cracks and structural damage
- Door panels, side seals and bottom rubbers
- Lip hinge, lip extension and lip support operation
Options to discuss
Frame repairs
Straightening or replacing bent arms, springs and frames on retractable shelters damaged by off-centre trailers, so the shelter returns square after each docking.
Airbag and blower repairs
Repairing or replacing torn airbags, failed blower motors and controls on inflatable shelters so the bags inflate fully and seal around the trailer again.
Regulations and approvals in England
Workplace safety in England is regulated by HSE. For a loading bay in Poulton-le-Fylde, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies before any work starts and design the bay accordingly.
Questions about dock shelter and seal repairs in Poulton-le-Fylde
Can you repair all makes of loading bay equipment?
We work on common makes and types of doors, dock levellers, shelters, seals and restraints. Parts availability varies, particularly for older or discontinued equipment, so it helps to send the make, model and photos of any data plates from your site in Poulton-le-Fylde. If original parts are not available, we tell you and price the alternatives, including replacement where that makes more sense.
Do you cover Lancashire for dock shelter and seal repairs?
Yes. We take on dock shelter and seal repairs for sites in Poulton-le-Fylde and throughout Lancashire. Each visit is arranged in advance, with the price agreed in writing before anyone attends. Specialist service engineers working under our management carry out the work, and we remain your point of contact from the first call to the written report.
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
Do you repair inflatable dock shelters?
Yes. We repair and replace torn airbags, failed blower motors, controls and fixings on inflatable shelters. Where the shelter is interlocked with the dock controls so it only inflates with a trailer present, that link is checked as part of the repair.
Can worn dock seal covers be replaced without new foam?
Often, yes. If the foam inside a seal pad still springs back, a new cover can be fitted over it. If the foam has stayed compressed or soaked up water, the pad is usually replaced complete. Photos of the pads, front and side, help us judge which applies.
Dock shelter and seal repairs near Poulton-le-Fylde
Distances are measured from Poulton-le-Fylde. Nearby towns we cover include Blackpool (3 miles), Thornton-Cleveleys (3 miles) and Lytham St Annes (6 miles), and other towns in the area are covered too.
Other loading bay services in Poulton-le-Fylde
Full guide to dock shelter and seal repairs · Everything we do in Poulton-le-Fylde
Get in touch about loading bay doors and dock equipment in Poulton-le-Fylde: call, email or use the quote tool.