- Location
- Rochester, Kent
- Main postcode district
- ME1
- Nearby (straight line)
- Chatham (1 mile), Strood (1 mile) and Gillingham (2 miles)
- Visit pricing
- Agreed in writing before we attend
Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.
Why do sites in Rochester choose this?
Multi-bay sites near Rochester often find several shelters in similar condition, so measuring and replacing curtains across the dock in one programme can reduce costs. Chilled distribution sites around Rochester tend to notice failing seals quickly, as gaps around the trailer cause condensation and ice on the dock floor.
Inflatable shelters at food sites in Rochester depend on blowers and airbags working properly, and a slow-inflating shelter is worth checking before it fails.
We do not turn up and then name a price. Every repair or service visit in Rochester is agreed in writing first, including what the charge covers. Sending photos of the damage, error codes or leaks helps us diagnose the problem before travelling and bring the likely parts. Any additional work found on the day is quoted for your approval before it starts. You then get a written report for your records.
Why is my dock shelter or seal letting in draughts?
A dock shelter or seal lets in draughts when the material that should press against the trailer is torn, worn, too short or no longer in the right place. Daylight around a docked trailer is the clearest sign.
- Torn or shrunk curtains: side curtains no longer overlap the trailer sides.
- Short head curtain: taller trailers than the shelter was sized for leave a gap across the top.
- Flattened seal pads: foam that has lost its spring no longer closes the gap.
- Worn pad covers: exposed foam soaks up water and breaks down faster.
- Bent frame: a retractable shelter frame that no longer returns square.
- Airbag or blower fault: inflatable shelters that inflate slowly or lose pressure.
- Trailer position: off-centre parking or worn bumpers that let trailers crush one side.
On chilled docks, gaps also show up as condensation, ice on the dock floor or frost around the door.
What happens on site during a shelter or seal repair?
During a shelter or seal repair the bay is closed to trailers while the engineer works from the yard, often using access equipment for the head curtain and top pad. Neighbouring bays can usually keep working, although access equipment may need space in front of them.
- Measure: where parts are made to measure, the shelter or seal is measured first and the parts ordered.
- Close the bay: no trailer on the dock and the yard area coned off.
- Isolate: on inflatable shelters, the blower supply is isolated and locked off.
- Replace parts: old curtains, pads or airbags are removed and new ones fitted, with frames straightened or replaced as agreed.
- Check the seal: overlap and compression are checked, with a trailer docked if one is available.
It helps if you can provide photos with a trailer docked, yard space for access equipment, a contact who can arrange electrical isolation and an agreed time when the bay can be released.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
What else does the engineer check at the bay?
- Safety edges, photocells and light curtains
- Track alignment, rollers and wall fixings
- Door panels, side seals and bottom rubbers
- Hydraulic oil level, hoses and cylinders for leaks
- Pit frame welds, platform cracks and structural damage
- Dock bumpers for missing rubber or loose fixings
Options to discuss
Seal pad refurbishment
Replacing worn foam pads, or just their covers where the foam is still sound, including tougher facings on the areas where trailers rub most.
Frame repairs
Straightening or replacing bent arms, springs and frames on retractable shelters damaged by off-centre trailers, so the shelter returns square after each docking.
What do the rules in England mean for the work?
Workplace safety in England is regulated by HSE. For a loading bay in Rochester, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies before any work starts and design the bay accordingly.
Questions about dock shelter and seal repairs in Rochester
Can you repair all makes of loading bay equipment?
We work on common makes and types of doors, dock levellers, shelters, seals and restraints. Parts availability varies, particularly for older or discontinued equipment, so it helps to send the make, model and photos of any data plates from your site in Rochester. If original parts are not available, we tell you and price the alternatives, including replacement where that makes more sense.
What information helps before a repair visit?
Photos or a short video of the fault are the most useful thing you can send, along with the make and model from the data plate, a description of what happens when the equipment is operated and any error codes. For a site in Rochester, also tell us about access, parking and site rules. With that, we can price the visit and bring the likely parts.
Do you cover Kent for dock shelter and seal repairs?
Yes. We take on dock shelter and seal repairs for sites in Rochester and throughout Kent. Each visit is arranged in advance, with the price agreed in writing before anyone attends. Specialist service engineers working under our management carry out the work, and we remain your point of contact from the first call to the written report.
Can you replace just the curtains on a dock shelter?
Yes. If the frame is still sound, the side and head curtains can be replaced on their own, which is the most common shelter repair. Curtains are usually made to measure, so the shelter is measured first and the new curtains fitted on a second visit, with both visits priced in advance.
Can worn dock seal covers be replaced without new foam?
Often, yes. If the foam inside a seal pad still springs back, a new cover can be fitted over it. If the foam has stayed compressed or soaked up water, the pad is usually replaced complete. Photos of the pads, front and side, help us judge which applies.
Dock shelter and seal repairs near Rochester
Businesses outside Rochester may find their nearest town in this list: Chatham (1 mile), Strood (1 mile) and Gillingham (2 miles). Each page covers doors, docks, repairs and servicing.
Other loading bay services in Rochester
Full guide to dock shelter and seal repairs · Everything we do in Rochester
Have photos of the door, leveller or shelter? Send them with your enquiry and we can give a clearer answer for your Rochester site.