- Location
- Bonnyrigg, Edinburgh and the Lothians
- Main postcode district
- EH19
- Nearby (straight line)
- Musselburgh (5 miles), Penicuik (6 miles) and Edinburgh (6 miles)
- Visit pricing
- Agreed in writing before we attend
Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.
Where does this fit at a dock in Bonnyrigg?
Inflatable shelters at food sites in Bonnyrigg depend on blowers and airbags working properly, and a slow-inflating shelter is worth checking before it fails. Curtains tearing at the corners at docks in Bonnyrigg can be a sign that taller or wider trailers are arriving than the shelter was sized for.
Multi-bay sites near Bonnyrigg often find several shelters in similar condition, so measuring and replacing curtains across the dock in one programme can reduce costs.
We do not turn up and then name a price. Every repair or service visit in Bonnyrigg is agreed in writing first, including what the charge covers. Sending photos of the damage, error codes or leaks helps us diagnose the problem before travelling and bring the likely parts. Any additional work found on the day is quoted for your approval before it starts. You then get a written report for your records.
How can I make shelter curtains and seal pads last longer?
Shelter curtains and seal pads last longest when trailers arrive straight, stop at the right distance and the parts are checked regularly. Most premature damage comes from how trailers are parked rather than from the material itself.
- Wheel guides: keep trailers centred so they do not drag one side curtain or crush one pad.
- Bumpers: worn bumpers let trailers reverse too far in and over-compress seals.
- Guide markings: clear centre lines on curtains and the dock help drivers line up.
- Early repairs: a small tear repaired early is cheaper than a full curtain later.
- Wear-resistant facings: seal pads can be specified with tougher covers where trailers rub most.
- Blower care: keeping blower intakes clear helps inflatable shelters inflate fully.
Our loading bay servicing includes shelters and seals, so wear is picked up alongside doors and levellers.
Why is my dock shelter or seal letting in draughts?
A dock shelter or seal lets in draughts when the material that should press against the trailer is torn, worn, too short or no longer in the right place. Daylight around a docked trailer is the clearest sign.
- Torn or shrunk curtains: side curtains no longer overlap the trailer sides.
- Short head curtain: taller trailers than the shelter was sized for leave a gap across the top.
- Flattened seal pads: foam that has lost its spring no longer closes the gap.
- Worn pad covers: exposed foam soaks up water and breaks down faster.
- Bent frame: a retractable shelter frame that no longer returns square.
- Airbag or blower fault: inflatable shelters that inflate slowly or lose pressure.
- Trailer position: off-centre parking or worn bumpers that let trailers crush one side.
On chilled docks, gaps also show up as condensation, ice on the dock floor or frost around the door.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
What else does the engineer check at the bay?
- Track alignment, rollers and wall fixings
- Door springs, cables and drums for wear or damage
- Vehicle restraint engagement and its signal sequence
- Manual override and emergency operation on powered doors
- Pit frame welds, platform cracks and structural damage
- Traffic light function and interlock operation
Options to discuss
Airbag and blower repairs
Repairing or replacing torn airbags, failed blower motors and controls on inflatable shelters so the bags inflate fully and seal around the trailer again.
Top pad and guide strip replacement
Renewing head pads, top seals and high-visibility guide strips that close the gap above the trailer and help drivers line up on the bay.
Which rules apply in Scotland?
HSE is the workplace safety regulator in Scotland. At a loading bay in Bonnyrigg, doors need to satisfy regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, dock equipment must be kept safe under PUWER, and drivers must be prevented from pulling away too early. We check what applies before any work starts.
Questions about dock shelter and seal repairs in Bonnyrigg
Do you provide a written report after each visit?
Yes. After every repair or service visit to a site in Bonnyrigg, you receive a written report setting out what was checked, what was found, what work was carried out and anything that still needs attention, with a quote for further work where needed. The report is useful for your maintenance records and for discussions with your insurer or inspector.
What information helps before a repair visit?
Photos or a short video of the fault are the most useful thing you can send, along with the make and model from the data plate, a description of what happens when the equipment is operated and any error codes. For a site in Bonnyrigg, also tell us about access, parking and site rules. With that, we can price the visit and bring the likely parts.
How is a repair or service visit in Bonnyrigg priced?
Repair and service visits are chargeable, and the price is agreed in writing before anyone attends. For dock shelter and seal repairs, the guide budget is £380 to £1,800 per repair, excluding VAT. The exact figure depends on the fault, parts, access and timing. If the engineer finds further work on the day, it is quoted for your approval before it is carried out.
Do you repair inflatable dock shelters?
Yes. We repair and replace torn airbags, failed blower motors, controls and fixings on inflatable shelters. Where the shelter is interlocked with the dock controls so it only inflates with a trailer present, that link is checked as part of the repair.
How is the price for a shelter or seal repair agreed?
You describe the damage and send photos, and we agree the visit price in writing before anyone attends. For made-to-measure parts that may include a measuring visit. Any extra work found on site is quoted and only carried out once you approve it.
Dock shelter and seal repairs near Bonnyrigg
If your site is not in Bonnyrigg itself, it may be near one of these: Musselburgh (5 miles), Penicuik (6 miles) and Edinburgh (6 miles). Pick the closest.
Other loading bay services in Bonnyrigg
Full guide to dock shelter and seal repairs · Everything we do in Bonnyrigg
Phone us to discuss your loading bay in Bonnyrigg, or start with the online quote tool if you prefer to send details first.