- Location
- Haverfordwest, Dyfed
- Main postcode district
- SA61
- Nearby (straight line)
- Milford Haven (7 miles), Pembroke Dock (8 miles) and Carmarthen (29 miles)
- Visit pricing
- Agreed in writing before we attend
Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.
Why do sites in Haverfordwest choose this?
Chilled distribution sites around Haverfordwest tend to notice failing seals quickly, as gaps around the trailer cause condensation and ice on the dock floor. Older retractable shelters on estates around Haverfordwest can often be refurbished with new curtains and pads rather than replaced, provided the frame is still sound.
Inflatable shelters at food sites in Haverfordwest depend on blowers and airbags working properly, and a slow-inflating shelter is worth checking before it fails.
Before a repair visit in Haverfordwest, we ask three things: what the equipment is, what it is doing wrong and whether you can send photos. With that, we price the visit and confirm it in writing, and nobody attends until you agree. If the engineer finds further faults, they are quoted first and only fixed with your approval. Each visit ends with a written report of findings and work done.
What happens on site during a shelter or seal repair?
During a shelter or seal repair the bay is closed to trailers while the engineer works from the yard, often using access equipment for the head curtain and top pad. Neighbouring bays can usually keep working, although access equipment may need space in front of them.
- Measure: where parts are made to measure, the shelter or seal is measured first and the parts ordered.
- Close the bay: no trailer on the dock and the yard area coned off.
- Isolate: on inflatable shelters, the blower supply is isolated and locked off.
- Replace parts: old curtains, pads or airbags are removed and new ones fitted, with frames straightened or replaced as agreed.
- Check the seal: overlap and compression are checked, with a trailer docked if one is available.
It helps if you can provide photos with a trailer docked, yard space for access equipment, a contact who can arrange electrical isolation and an agreed time when the bay can be released.
Why is my dock shelter or seal letting in draughts?
A dock shelter or seal lets in draughts when the material that should press against the trailer is torn, worn, too short or no longer in the right place. Daylight around a docked trailer is the clearest sign.
- Torn or shrunk curtains: side curtains no longer overlap the trailer sides.
- Short head curtain: taller trailers than the shelter was sized for leave a gap across the top.
- Flattened seal pads: foam that has lost its spring no longer closes the gap.
- Worn pad covers: exposed foam soaks up water and breaks down faster.
- Bent frame: a retractable shelter frame that no longer returns square.
- Airbag or blower fault: inflatable shelters that inflate slowly or lose pressure.
- Trailer position: off-centre parking or worn bumpers that let trailers crush one side.
On chilled docks, gaps also show up as condensation, ice on the dock floor or frost around the door.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Checks made while we are on site
- Pit frame welds, platform cracks and structural damage
- Leveller toe guards and side skirting, where fitted
- Wiring, isolators and motor performance under load
- Track alignment, rollers and wall fixings
- Lip hinge, lip extension and lip support operation
- Manual override and emergency operation on powered doors
Options to discuss
Frame repairs
Straightening or replacing bent arms, springs and frames on retractable shelters damaged by off-centre trailers, so the shelter returns square after each docking.
Top pad and guide strip replacement
Renewing head pads, top seals and high-visibility guide strips that close the gap above the trailer and help drivers line up on the bay.
Regulations and approvals in Wales
HSE regulates workplace safety in Wales. Loading bays in Haverfordwest need doors that meet regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, work equipment maintained under PUWER, and safeguards that stop vehicles leaving the dock too early. We check what applies before any work starts and build those measures into the design.
Questions about dock shelter and seal repairs in Haverfordwest
Can you take over our existing loading bay maintenance arrangement?
Yes. Send us a list of the equipment at your Haverfordwest site, with makes, models and approximate ages if known, plus recent service or inspection reports. We will propose a planned maintenance schedule and price it per item per visit. The first visit records the condition of everything, so you have a clear starting point for future servicing.
What happens if the engineer finds the equipment unsafe?
If equipment is found to be unsafe, the engineer will tell you straight away and recommend that it is isolated and taken out of use until it is repaired. That is recorded in the written report. We then quote the repair so you can decide how to proceed. Keeping an unsafe door or leveller in service puts people at risk, so we will always raise it.
Do you provide a written report after each visit?
Yes. After every repair or service visit to a site in Haverfordwest, you receive a written report setting out what was checked, what was found, what work was carried out and anything that still needs attention, with a quote for further work where needed. The report is useful for your maintenance records and for discussions with your insurer or inspector.
Can worn dock seal covers be replaced without new foam?
Often, yes. If the foam inside a seal pad still springs back, a new cover can be fitted over it. If the foam has stayed compressed or soaked up water, the pad is usually replaced complete. Photos of the pads, front and side, help us judge which applies.
How is the price for a shelter or seal repair agreed?
You describe the damage and send photos, and we agree the visit price in writing before anyone attends. For made-to-measure parts that may include a measuring visit. Any extra work found on site is quoted and only carried out once you approve it.
Dock shelter and seal repairs near Haverfordwest
Other towns within reach of Haverfordwest on our coverage list include Milford Haven (7 miles), Pembroke Dock (8 miles) and Carmarthen (29 miles), all covered on the same terms.
Other loading bay services in Haverfordwest
Full guide to dock shelter and seal repairs · Everything we do in Haverfordwest
Have photos of the door, leveller or shelter? Send them with your enquiry and we can give a clearer answer for your Haverfordwest site.