- Location
- Marlow, Buckinghamshire
- Main postcode district
- SL7
- Nearby (straight line)
- Maidenhead (4 miles), High Wycombe (4 miles) and Slough (9 miles)
- Visit pricing
- Agreed in writing before we attend
Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.
What matters for dock shelter and seal repairs in Marlow?
If tenants change at a unit in Marlow, checking the shelters and seals is sensible, because a new fleet may not suit the old curtain sizes. Chilled distribution sites around Marlow tend to notice failing seals quickly, as gaps around the trailer cause condensation and ice on the dock floor.
Inflatable shelters at food sites in Marlow depend on blowers and airbags working properly, and a slow-inflating shelter is worth checking before it fails.
Before a repair visit in Marlow, we ask three things: what the equipment is, what it is doing wrong and whether you can send photos. With that, we price the visit and confirm it in writing, and nobody attends until you agree. If the engineer finds further faults, they are quoted first and only fixed with your approval. Each visit ends with a written report of findings and work done.
Why is my dock shelter or seal letting in draughts?
A dock shelter or seal lets in draughts when the material that should press against the trailer is torn, worn, too short or no longer in the right place. Daylight around a docked trailer is the clearest sign.
- Torn or shrunk curtains: side curtains no longer overlap the trailer sides.
- Short head curtain: taller trailers than the shelter was sized for leave a gap across the top.
- Flattened seal pads: foam that has lost its spring no longer closes the gap.
- Worn pad covers: exposed foam soaks up water and breaks down faster.
- Bent frame: a retractable shelter frame that no longer returns square.
- Airbag or blower fault: inflatable shelters that inflate slowly or lose pressure.
- Trailer position: off-centre parking or worn bumpers that let trailers crush one side.
On chilled docks, gaps also show up as condensation, ice on the dock floor or frost around the door.
What happens on site during a shelter or seal repair?
During a shelter or seal repair the bay is closed to trailers while the engineer works from the yard, often using access equipment for the head curtain and top pad. Neighbouring bays can usually keep working, although access equipment may need space in front of them.
- Measure: where parts are made to measure, the shelter or seal is measured first and the parts ordered.
- Close the bay: no trailer on the dock and the yard area coned off.
- Isolate: on inflatable shelters, the blower supply is isolated and locked off.
- Replace parts: old curtains, pads or airbags are removed and new ones fitted, with frames straightened or replaced as agreed.
- Check the seal: overlap and compression are checked, with a trailer docked if one is available.
It helps if you can provide photos with a trailer docked, yard space for access equipment, a contact who can arrange electrical isolation and an agreed time when the bay can be released.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
What else does the engineer check at the bay?
- Hydraulic oil level, hoses and cylinders for leaks
- Control panels, push buttons and emergency stops
- Dock bumpers for missing rubber or loose fixings
- Shelter curtains, frames and side pads for tears
- Door springs, cables and drums for wear or damage
- Wiring, isolators and motor performance under load
Options to discuss
Seal pad refurbishment
Replacing worn foam pads, or just their covers where the foam is still sound, including tougher facings on the areas where trailers rub most.
Airbag and blower repairs
Repairing or replacing torn airbags, failed blower motors and controls on inflatable shelters so the bags inflate fully and seal around the trailer again.
Which rules apply in England?
Workplace safety in England is regulated by HSE. For a loading bay in Marlow, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies before any work starts and design the bay accordingly.
Questions about dock shelter and seal repairs in Marlow
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
Can you take over our existing loading bay maintenance arrangement?
Yes. Send us a list of the equipment at your Marlow site, with makes, models and approximate ages if known, plus recent service or inspection reports. We will propose a planned maintenance schedule and price it per item per visit. The first visit records the condition of everything, so you have a clear starting point for future servicing.
Can repairs be carried out outside our working hours?
Yes, by arrangement. Evening, night or weekend visits can be booked so that repairs and servicing at your Marlow site cause less disruption to loading. Out-of-hours attendance usually affects the price, so we include it when we agree the visit charge in writing. Tell us your shift pattern and the times when the dock is quietest.
Do you repair inflatable dock shelters?
Yes. We repair and replace torn airbags, failed blower motors, controls and fixings on inflatable shelters. Where the shelter is interlocked with the dock controls so it only inflates with a trailer present, that link is checked as part of the repair.
Can you replace just the curtains on a dock shelter?
Yes. If the frame is still sound, the side and head curtains can be replaced on their own, which is the most common shelter repair. Curtains are usually made to measure, so the shelter is measured first and the new curtains fitted on a second visit, with both visits priced in advance.
Dock shelter and seal repairs near Marlow
We also cover towns near Marlow, including Maidenhead (4 miles), High Wycombe (4 miles) and Slough (9 miles). Each has its own page with the same services and process.
Other loading bay services in Marlow
Full guide to dock shelter and seal repairs · Everything we do in Marlow
Request a quote for your loading bay in Marlow, attaching photos of the dock, the equipment and any damage.