- Location
- Oban, Argyll and Bute
- Main postcode district
- PA34
- Nearby (straight line)
- Lochgilphead (26 miles)
- Visit pricing
- Agreed in writing before we attend
Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.
Why do sites in Oban choose this?
Older retractable shelters on estates around Oban can often be refurbished with new curtains and pads rather than replaced, provided the frame is still sound. Inflatable shelters at food sites in Oban depend on blowers and airbags working properly, and a slow-inflating shelter is worth checking before it fails.
Curtains tearing at the corners at docks in Oban can be a sign that taller or wider trailers are arriving than the shelter was sized for.
Planned servicing and reactive repairs in Oban are both chargeable. We agree the price of each visit in writing beforehand, and we never extend the scope without asking. Photos taken by your team help us plan the work and the parts. The engineer records the condition of doors, levellers, shelters and safety equipment as they go, and you receive that as a written report after the visit.
How can I make shelter curtains and seal pads last longer?
Shelter curtains and seal pads last longest when trailers arrive straight, stop at the right distance and the parts are checked regularly. Most premature damage comes from how trailers are parked rather than from the material itself.
- Wheel guides: keep trailers centred so they do not drag one side curtain or crush one pad.
- Bumpers: worn bumpers let trailers reverse too far in and over-compress seals.
- Guide markings: clear centre lines on curtains and the dock help drivers line up.
- Early repairs: a small tear repaired early is cheaper than a full curtain later.
- Wear-resistant facings: seal pads can be specified with tougher covers where trailers rub most.
- Blower care: keeping blower intakes clear helps inflatable shelters inflate fully.
Our loading bay servicing includes shelters and seals, so wear is picked up alongside doors and levellers.
What happens on site during a shelter or seal repair?
During a shelter or seal repair the bay is closed to trailers while the engineer works from the yard, often using access equipment for the head curtain and top pad. Neighbouring bays can usually keep working, although access equipment may need space in front of them.
- Measure: where parts are made to measure, the shelter or seal is measured first and the parts ordered.
- Close the bay: no trailer on the dock and the yard area coned off.
- Isolate: on inflatable shelters, the blower supply is isolated and locked off.
- Replace parts: old curtains, pads or airbags are removed and new ones fitted, with frames straightened or replaced as agreed.
- Check the seal: overlap and compression are checked, with a trailer docked if one is available.
It helps if you can provide photos with a trailer docked, yard space for access equipment, a contact who can arrange electrical isolation and an agreed time when the bay can be released.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
What else does the engineer check at the bay?
- Safety edges, photocells and light curtains
- Door springs, cables and drums for wear or damage
- Door panels, side seals and bottom rubbers
- Track alignment, rollers and wall fixings
- Manual override and emergency operation on powered doors
- Traffic light function and interlock operation
Options to discuss
Seal pad refurbishment
Replacing worn foam pads, or just their covers where the foam is still sound, including tougher facings on the areas where trailers rub most.
Top pad and guide strip replacement
Renewing head pads, top seals and high-visibility guide strips that close the gap above the trailer and help drivers line up on the bay.
Regulations and approvals in Scotland
Energy standards for buildings in Scotland are set out in Section 6 of the Building Standards Technical Handbook. For new or replacement loading bay doors in Oban, we confirm the figure that applies to your project and check what applies before any work starts, rather than relying on rules written for elsewhere in the UK.
If equipment needs attention at a site in Oban, the visit is arranged in advance and its price, including travel and any accommodation, is agreed before anyone sets off. Photos from your team help us bring the right parts first time.
Questions about dock shelter and seal repairs in Oban
What happens if the engineer finds the equipment unsafe?
If equipment is found to be unsafe, the engineer will tell you straight away and recommend that it is isolated and taken out of use until it is repaired. That is recorded in the written report. We then quote the repair so you can decide how to proceed. Keeping an unsafe door or leveller in service puts people at risk, so we will always raise it.
Can repairs be carried out outside our working hours?
Yes, by arrangement. Evening, night or weekend visits can be booked so that repairs and servicing at your Oban site cause less disruption to loading. Out-of-hours attendance usually affects the price, so we include it when we agree the visit charge in writing. Tell us your shift pattern and the times when the dock is quietest.
Do you cover Argyll and Bute for dock shelter and seal repairs?
Yes. We take on dock shelter and seal repairs for sites in Oban and throughout Argyll and Bute. Each visit is arranged in advance, with the price agreed in writing before anyone attends. Specialist service engineers working under our management carry out the work, and we remain your point of contact from the first call to the written report.
Why do shelter curtains keep tearing?
Shelter curtains usually keep tearing because trailers arrive off-centre, the curtains are too short or tight for the trailers now in use, or worn bumpers let trailers reverse too far in. Fixing the cause, for example with wheel guides or resized curtains, stops repeat damage.
Do you repair inflatable dock shelters?
Yes. We repair and replace torn airbags, failed blower motors, controls and fixings on inflatable shelters. Where the shelter is interlocked with the dock controls so it only inflates with a trailer present, that link is checked as part of the repair.
Dock shelter and seal repairs near Oban
Sites close to Oban get the same service, including those in Lochgilphead (26 miles), with every job run the same way.
Other loading bay services in Oban
Full guide to dock shelter and seal repairs · Everything we do in Oban
Tell us what is happening at your Oban dock, what equipment is there and when it is used, and we will suggest the right next step.