- Location
- Chippenham, Wiltshire
- Main postcode district
- SN15
- Nearby (straight line)
- Calne (5 miles), Melksham (6 miles) and Devizes (9 miles)
- Visit pricing
- Agreed in writing before we attend
Dock leveller repair covers finding and fixing faults on the bridge between the dock and the trailer bed, including hydraulic cylinders, hoses and power packs, safety and check valves, lip hinges and lip cylinders, platform and lip damage, toe guards and control panels. It applies to swing-lip, telescopic-lip, mechanical and edge-of-dock levellers, with the aim of returning each one to safe working order.
How does this suit sites in Chippenham?
Insurer inspections at sites around Chippenham may list leveller defects that need attention, and we can price each item directly from the report. Older units in Chippenham may still run mechanical or early hydraulic levellers, where a well-judged repair can keep the bay working before replacement is needed.
Distribution docks in Chippenham that run several shifts put heavy cycles through leveller hydraulics, so leaks and slow operation can show up sooner.
Tell us what has gone wrong at your Chippenham site and, if you can, send photos of the fault and any labels on the equipment. We then confirm the visit price in writing, and nobody attends until you have agreed it. On site, the engineer diagnoses and repairs what was agreed; anything extra is quoted first, never added without your say-so. A written report follows, covering findings, work carried out and recommendations.
What happens on site during a dock leveller repair?
During a leveller repair the bay is closed, the leveller is isolated and propped, and the engineer works from the pit or deck to diagnose and repair the fault. Neighbouring bays normally keep working.
- Close the bay: no trailer on the dock, the door closed and forklifts kept away.
- Isolate and prop: the leveller is electrically isolated and locked off, and the platform raised and supported on its maintenance strut before anyone goes underneath.
- Clean and inspect: debris and spilt oil are cleared from the pit so the fault can be traced.
- Repair: parts are fitted or welded. Anything beyond the agreed scope is quoted first.
- Test: the leveller is cycled, the lip checked and controls tested before the bay reopens.
It helps if you can provide a clear bay, a contact on site, photos or labels showing the leveller type and size, and any insurer inspection report that lists the defect.
How much does a dock leveller repair cost?
A dock leveller repair typically costs £220 to £2,600 per repair, excluding VAT. Replacing a hose or limit switch sits towards the lower end; a new power pack, cylinder set or rebuilt lip hinge sits towards the top.
How the price is agreed:
- You describe the fault, ideally with photos of the leveller, the pit and any labels.
- We agree the visit price in writing before anyone attends.
- Anything found on site beyond that scope is quoted and approved by you before it is done.
What moves the price:
- Parts: cylinders, power packs, valves and hinge components vary widely in cost.
- Welding and fabrication: cracked decks, broken hinge knuckles and bent lips take more time.
- Hydraulic work: an oil change and bleeding the system add to cylinder or hose repairs.
- Pit condition: heavy debris or standing water must be cleared first.
- Out-of-hours working and location: both are agreed in the visit price.
VAT is added at the standard rate.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Checks made while we are on site
- Door springs, cables and drums for wear or damage
- Previous service and inspection records, where available
- Hydraulic oil level, hoses and cylinders for leaks
- Lip hinge, lip extension and lip support operation
- Shelter curtains, frames and side pads for tears
- Safety edges, photocells and light curtains
Options to discuss
Structural and weld repairs
Cracked deck plates, broken welds and damaged front sections repaired by welding or with fabricated replacement parts, restoring the platform's strength.
Hydraulic repairs
Cylinders resealed or replaced, hoses and fittings renewed, check and safety valves tested, and the system refilled with fresh oil and bled so the platform moves smoothly again.
Planning, building control and safety law in England
Sites in Chippenham fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies before any work starts and build any approvals into the plan.
Questions about dock leveller repairs in Chippenham
Can repairs be carried out outside our working hours?
Yes, by arrangement. Evening, night or weekend visits can be booked so that repairs and servicing at your Chippenham site cause less disruption to loading. Out-of-hours attendance usually affects the price, so we include it when we agree the visit charge in writing. Tell us your shift pattern and the times when the dock is quietest.
Do you cover Wiltshire for dock leveller repairs?
Yes. We take on dock leveller repairs for sites in Chippenham and throughout Wiltshire. Each visit is arranged in advance, with the price agreed in writing before anyone attends. Specialist service engineers working under our management carry out the work, and we remain your point of contact from the first call to the written report.
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
Do you repair mechanical dock levellers?
Yes, where parts are still available. Mechanical levellers use springs and a hold-down mechanism rather than hydraulics, and common repairs include springs, release mechanisms and lip hinges. Where parts are hard to find or faults keep recurring, the report may suggest pricing a hydraulic replacement.
How is the price for a leveller repair agreed?
You describe the fault and send photos, and we agree the visit price in writing before anyone attends. If the engineer finds more work is needed, it is quoted and only carried out once you approve it. The visit is chargeable, and the price is always agreed first.
Dock leveller repairs near Chippenham
Close neighbours of Chippenham with their own pages here: Calne (5 miles), Melksham (6 miles) and Devizes (9 miles). Choose one to see coverage details for that town.
Other loading bay services in Chippenham
Full guide to dock leveller repairs · Everything we do in Chippenham
Have photos of the door, leveller or shelter? Send them with your enquiry and we can give a clearer answer for your Chippenham site.