- Location
- Faversham, Kent
- Main postcode district
- ME13
- Nearby (straight line)
- Whitstable (7 miles), Sittingbourne (7 miles) and Canterbury (9 miles)
- Visit pricing
- Agreed in writing before we attend
Dock leveller repair covers finding and fixing faults on the bridge between the dock and the trailer bed, including hydraulic cylinders, hoses and power packs, safety and check valves, lip hinges and lip cylinders, platform and lip damage, toe guards and control panels. It applies to swing-lip, telescopic-lip, mechanical and edge-of-dock levellers, with the aim of returning each one to safe working order.
Where does this fit at a dock in Faversham?
Every leveller repair enquiry from Faversham starts with you describing the fault, then a visit price agreed in writing before an engineer attends. When a leveller at a warehouse near Faversham sinks under load, it should be taken out of use until the hydraulic cause has been found and fixed.
Low temperatures at chilled and frozen docks in Faversham can affect hydraulic oil and seals, so it helps to mention the operating temperature when reporting a fault.
For dock leveller repairs at sites in Faversham, you will always know the cost before anyone sets off. The visit is chargeable and its price is agreed in writing. Clear photos of the problem help the engineer arrive prepared. Where the visit reveals more work, we stop, explain and quote before going further, and a written report follows every attendance so you have a record of the condition of each item.
Can you repair defects listed on an insurer inspection report?
Yes. Repairing defects from an engineering insurer's inspection report is one of the most common reasons for a leveller repair visit. Sending us the report is the quickest way to get an accurate price.
How it works:
- Send the report: we read each defect against the leveller it refers to, with any photos you can add.
- Price each item: we agree the visit price in writing, listing the defects it covers.
- Repair: the engineer carries out the listed repairs, and any further defects found are quoted before work.
- Record: the written report shows which defects were cleared and how, which you can keep with the insurer's report.
Any re-inspection by the insurer is arranged between you and them. If a defect is marked as dangerous, the leveller should stay out of use until it has been repaired.
Grouping several levellers' defects into one visit usually keeps the cost per item down.
What inspection rules apply to dock levellers?
Dock levellers are work equipment under the Provision and Use of Work Equipment Regulations 1998 (PUWER), so they must be maintained in a safe condition and inspected where deterioration could lead to danger. In Northern Ireland the equivalent is PUWER (Northern Ireland) 1999.
Engineering insurers commonly inspect dock levellers under PUWER at 12-month intervals. Their reports list defects, sometimes marked for action before further use, and repairs are often needed to clear them.
Most levellers are treated as work equipment under PUWER. A leveller designed or used to lift people may fall under the Lifting Operations and Lifting Equipment Regulations (LOLER), with 6-monthly thorough examination. This depends on the equipment and how it is used; your insurer or competent person will confirm.
Levellers are made to BS EN 1398:2009, the dock leveller safety standard. HSE guidance notes that guards or skirting may be needed where something could be caught, so damaged toe guards are repaired as part of the job. See our guide to dock leveller inspections under PUWER and LOLER.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Checks made while we are on site
- Hydraulic oil level, hoses and cylinders for leaks
- Vehicle restraint engagement and its signal sequence
- Traffic light function and interlock operation
- Door springs, cables and drums for wear or damage
- Safety edges, photocells and light curtains
- Previous service and inspection records, where available
Options to discuss
Lip and hinge repairs
Seized or worn lip hinges rebuilt, hinge pins replaced, bent lips straightened or replaced, and lip cylinders repaired so the lip extends fully on to the trailer bed.
Hydraulic repairs
Cylinders resealed or replaced, hoses and fittings renewed, check and safety valves tested, and the system refilled with fresh oil and bled so the platform moves smoothly again.
Regulations and approvals in England
Sites in Faversham fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies before any work starts and build any approvals into the plan.
Questions about dock leveller repairs in Faversham
How often should equipment at our Faversham site be serviced?
It depends on how hard the equipment works and on the manufacturer's recommendations. A multi-shift dock with frequent trailer movements needs more attention than a door that opens a few times a day. We suggest a schedule after looking at the equipment and how it is used, and we can line visits up with your insurance inspections where that helps.
Do you provide a written report after each visit?
Yes. After every repair or service visit to a site in Faversham, you receive a written report setting out what was checked, what was found, what work was carried out and anything that still needs attention, with a quote for further work where needed. The report is useful for your maintenance records and for discussions with your insurer or inspector.
Do you cover Kent for dock leveller repairs?
Yes. We take on dock leveller repairs for sites in Faversham and throughout Kent. Each visit is arranged in advance, with the price agreed in writing before anyone attends. Specialist service engineers working under our management carry out the work, and we remain your point of contact from the first call to the written report.
Can a leveller be repaired without disturbing the pit?
Usually yes. Most leveller repairs are carried out in place, working from the deck or from the pit with the platform propped. If the pit itself is cracked, broken at the edges or holding water, that is noted in the report and any pit repair is priced separately.
Is it safe to keep using a leaking dock leveller?
No. A dock leveller leaking hydraulic oil should be taken out of use until it has been checked, because the leak may affect how the platform holds its position under load. Oil in the pit is also a slip and environmental hazard. Describe the leak and send photos so we can plan the repair.
Dock leveller repairs near Faversham
Close neighbours of Faversham with their own pages here: Whitstable (7 miles), Sittingbourne (7 miles) and Canterbury (9 miles). Choose one to see coverage details for that town.
Other loading bay services in Faversham
Full guide to dock leveller repairs · Everything we do in Faversham
Whether it is a new bay or a fault on an existing one, call us or request a quote for your site in Faversham.