Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Dock safety · Epsom

Dock bumpers in Epsom

Everything to do with dock bumpers at sites in Epsom is covered here: how we work, what we check and what you can expect from the process.

Guide £120–£480 per bumper ex VATFree site surveyKT17, KT19
Book a free survey0800 088 6248
Location
Epsom, Surrey
Main postcode districts
KT17 and KT19
Nearby (straight line)
Sutton (3 miles), Worcester Park (4 miles) and Leatherhead (4 miles)
Survey and quote
Free, with a fixed written quote
Dock bumpers, in short

Dock bumpers are rubber or rubber-and-steel buffers fixed to the face of a loading dock, either side of the leveller, to absorb the impact of reversing vehicles. They hold the trailer a set distance from the building, protect the dock wall, leveller and door, and help a dock seal or shelter compress evenly. Most bays use two bumpers, replaced as they wear.

What matters for dock bumpers in Epsom?

Sites near Epsom handling a mix of articulated trailers, rigid vehicles and vans may need taller bumpers or a second lower pair to protect the dock face. Older industrial units around Epsom sometimes still have their original bumpers, or none at all, leaving the dock wall and leveller lip to absorb every reversing impact.

Chilled and food distribution operations in Epsom depend on dock seals compressing evenly, which only happens when the bumpers behind them are still the correct depth.

Here is what happens after you contact us about a site in Epsom. We arrange a free survey, measure up and send a fixed written quote. If you go ahead, we manage the whole job, including ordering, delivery and coordination with your site team. Specialist installation engineers working under our management do the fitting, at times built around your loading schedule, with out-of-hours work by arrangement. Testing and handover documents close the job.

How much do dock bumpers cost?

Dock bumpers typically cost £120 to £480 per bumper, supplied and fitted, excluding VAT. Most bays need two, so the cost per dock depends mainly on the type of bumper and how it is fixed.

The main things that move the price are:

  • Bumper type: laminated rubber is the most economical; moulded, steel-faced and vertical sliding designs cost more.
  • Size and projection: deeper or taller bumpers use more material and heavier fixings.
  • Fixing method: anchoring into sound concrete is simpler than welding to steel embeds or repairing a broken dock face first.
  • Number of bays: doing several docks in one visit spreads access and travel costs.
  • Working hours and location: out-of-hours working and remote or island sites add cost, and any travel cost is shown in the quote.

These are guide budgets. After a free site survey we send a written quote, and that quote is the fixed price. VAT is added at the standard rate.

What happens on site when dock bumpers are fitted?

Fitting dock bumpers is a short job carried out from yard level, and only the bay being worked on is taken out of use.

  1. Isolate the bay: no trailer on the dock, the leveller parked and the door closed, with the yard area in front coned off.
  2. Remove the old bumpers: worn units and corroded fixings are taken off and the dock face is checked for cracked or spalled concrete.
  3. Fix the new bumpers: holes are drilled and the bumpers secured with resin or mechanical anchors, or welded to existing steelwork where that gives the better fixing.
  4. Allow cure time: resin anchors need time to cure before a trailer is reversed on to them, and the engineer will confirm when the bay can reopen.

We ask you to provide a clear bay, safe access to the yard, a named contact on the day and details of any permit-to-work or site induction. If the dock face needs concrete repair first, that is identified at survey and priced in the quote rather than discovered on the day.

Guide price, Epsom
£120–£480 per bumper, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • Bumper position and wear or damage on the dock face
  • How drivers are prevented from pulling away too early
  • Headroom above the opening and which track type will suit it
  • Dock height and the mix of trailers you load
  • Age and condition of the equipment already in place
  • Traffic routes for vehicles and separation of pedestrians

Options to discuss

Vertical sliding bumpers

A face that rides up and down with the trailer instead of rubbing against it, reducing wear on very high-throughput docks.

Steel-faced bumpers

A rubber body behind a steel face plate that resists scuffing as the trailer bed moves during loading. Suited to busy bays with heavy forklift traffic.

Regulations and approvals in England

Workplace safety in England is regulated by HSE. For a loading bay in Epsom, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about dock bumpers in Epsom

How long does installation take at a site in Epsom?

It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.

Can you work outside our normal operating hours in Epsom?

Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.

Is VAT included in your guide prices for dock bumpers?

No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Surrey as everywhere else: for dock bumpers, it is £120 to £480 per bumper, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.

Are dock bumpers included in a complete bay package?

Yes. When we supply a complete loading bay, dock bumpers are specified alongside the leveller, door and shelter or seal so that projection, height and seal compression all work together. Bumpers can also be ordered with wheel guides and dock lights as part of a smaller safety upgrade on an existing bay.

Do you replace dock bumpers without changing other equipment?

Yes. Bumper replacement is often a standalone job, and we can fit new bumpers to existing docks without touching the door, leveller or shelter. If we notice other wear on site, such as a damaged seal or a struck leveller lip, we note it for you.

Dock bumpers near Epsom

We also cover towns near Epsom, including Sutton (3 miles), Worcester Park (4 miles) and Leatherhead (4 miles). Each has its own page with the same services and process.

Other loading bay services in Epsom

Full guide to dock bumpers · Everything we do in Epsom

Phone us to discuss your loading bay in Epsom, or start with the online quote tool if you prefer to send details first.

Call freeGet a quote