- Location
- Haslemere, Surrey
- Main postcode district
- GU27
- Nearby (straight line)
- Bordon (7 miles), Godalming (8 miles) and Farnham (9 miles)
- Survey and quote
- Free, with a fixed written quote
A complete loading bay installation is the supply and fitting of every item a dock needs as one coordinated package: typically an insulated door, a dock leveller, a shelter or seal, bumpers, wheel guides, a dock light and traffic lights or interlocks. One party manages the design, sequence and commissioning, so the parts fit together and work as a single system.
What should sites in Haslemere consider?
Developers building new distribution sheds in Haslemere can hand the whole dock package to one specialist, reducing the risk of gaps between the door, leveller and shelter trades. Cold chain operators near Haslemere benefit from specifying the insulated door, shelter and leveller as one package so the thermal details match at every bay.
Occupiers taking on a shell unit in Haslemere often need every bay fitted out at once, and a single programme keeps the handover date predictable.
If you are planning complete loading bay installations for a site in Haslemere, expect four stages. A free survey and fixed written quote come first. We then agree a programme with you, including any out-of-hours work. Specialist installation engineers carry out the installation under our management, with us as your single point of contact. Finally, the equipment is tested, your staff are shown how it works and everything is handed over with its documentation.
What happens on site during a complete bay installation?
On a new build, a complete bay is installed to the main contractor's programme once the pits, openings and supplies are ready. In an operating warehouse, bays are replaced one at a time so the rest of the dock keeps working.
- Isolation: each bay is closed to trailers and its old equipment isolated and removed.
- Security: the opening is kept secure, either by fitting the new door early or with temporary hoarding.
- Lifting and deliveries: levellers and door sections need a clear delivery area and safe lifting.
- Commissioning: the door, leveller, shelter and controls are tested together, including any interlocks.
We ask you to provide access and a delivery area, power and welfare arrangements on construction sites, permit-to-work and induction details, and an agreed order for releasing bays. At handover you receive commissioning and test records, operating instructions and maintenance requirements. Equipment comes with the manufacturer's warranty, and workmanship terms are set out in writing in the quote.
How do you choose the right equipment for each bay?
The right equipment for each bay comes from three questions: what vehicles arrive, what goods move through the door, and how many trailers the bay handles each day. The answers drive each choice:
- Vehicles: trailer bed heights commonly range from about 900 to 1,600 mm, which sets leveller length. Trailers that cannot reverse tight to the dock, or need end-loading, suit a telescopic lip.
- Goods: chilled and frozen goods need a well-insulated door and a tight seal or inflatable shelter; ambient goods usually suit a retractable shelter.
- Traffic: very busy bays may justify faster doors and heavier-duty levellers, plus restraints and interlocks.
- Building: a pit leveller, an edge-of-dock leveller or a loading house, depending on floor height and space.
Not every bay on a site needs the same kit. One bay with a lift table or a telescopic lip can handle the awkward vehicles. Our guide to specifying the dock package for a new warehouse walks through the decisions.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What does the free survey cover?
- Traffic routes for vehicles and separation of pedestrians
- Drainage on recessed or sloping dock approaches
- How often each door cycles during a typical shift
- Wall and steel structure for door, shelter and bumper fixings
- Age and condition of the equipment already in place
- Escape routes and pedestrian doors close to the bay
Options to discuss
High-throughput bay
A faster door, telescopic-lip leveller and vehicle restraint with interlocked traffic lights, for docks handling many trailers a day and where drive-away risk is high.
Standard ambient bay
Insulated sectional door, hydraulic swing-lip leveller, retractable shelter, bumpers, wheel guides and a dock light. Suits general distribution and manufacturing docks handling mixed trailer types.
What do the rules in England mean for the work?
Lift tables and dock lifts in Haslemere may fall under LOLER, with thorough examination at least every 12 months, or every 6 months where people are lifted. It depends on the equipment and how it is used, and your insurer or competent person will confirm. Dock levellers are usually treated as work equipment under PUWER. We check what applies at survey.
Questions about complete loading bay installations in Haslemere
What details do you need from us to quote for complete loading bay installations?
To get started, send the site address in Haslemere, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Can you work outside our normal operating hours in Haslemere?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
How long does installation take at a site in Haslemere?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
Can you replace a whole bay in an operating warehouse?
Yes. In a live building we replace one bay at a time, keeping the opening secure and the neighbouring bays working. The order and timing of each bay are agreed with you so the dock keeps enough capacity throughout the works.
Who forms the leveller pit?
The leveller pit is usually formed by the groundworker or main contractor to our drawings. Where there is no groundworker on site, we can arrange the pit works as part of the project, priced separately after survey. Either way, the pit details come from the leveller chosen for the bay.
Complete loading bay installation near Haslemere
The same survey, quote and repair service is available in towns around Haslemere, such as Bordon (7 miles), Godalming (8 miles) and Farnham (9 miles).
Other loading bay services in Haslemere
Full guide to complete loading bay installations · Everything we do in Haslemere
Speak to us about your Haslemere loading bay. We will ask the right questions, then set out the next step clearly.