- Location
- New Milton, Hampshire
- Main postcode district
- BH25
- Nearby (straight line)
- Christchurch (5 miles), Bournemouth (10 miles) and Ferndown (11 miles)
- Survey and quote
- Free, with a fixed written quote
A complete loading bay installation is the supply and fitting of every item a dock needs as one coordinated package: typically an insulated door, a dock leveller, a shelter or seal, bumpers, wheel guides, a dock light and traffic lights or interlocks. One party manages the design, sequence and commissioning, so the parts fit together and work as a single system.
Is this right for your site in New Milton?
Developers building new distribution sheds in New Milton can hand the whole dock package to one specialist, reducing the risk of gaps between the door, leveller and shelter trades. Warehouses near New Milton handling mixed trailer types can specify different levellers bay by bay within one package while keeping a common control and maintenance standard.
Every complete bay enquiry in New Milton starts with a site survey and a written quote that sets out exactly what is included and what is priced separately.
Keeping the dock running is usually the first concern, so we plan around it. After a free survey of your New Milton site and a written quote at a fixed price, we agree when each bay can be released and whether any work should happen out of hours. Specialist installation engineers working under our management then fit the equipment, and we test it and hand over the documentation before the bay goes back into use.
What happens on site during a complete bay installation?
On a new build, a complete bay is installed to the main contractor's programme once the pits, openings and supplies are ready. In an operating warehouse, bays are replaced one at a time so the rest of the dock keeps working.
- Isolation: each bay is closed to trailers and its old equipment isolated and removed.
- Security: the opening is kept secure, either by fitting the new door early or with temporary hoarding.
- Lifting and deliveries: levellers and door sections need a clear delivery area and safe lifting.
- Commissioning: the door, leveller, shelter and controls are tested together, including any interlocks.
We ask you to provide access and a delivery area, power and welfare arrangements on construction sites, permit-to-work and induction details, and an agreed order for releasing bays. At handover you receive commissioning and test records, operating instructions and maintenance requirements. Equipment comes with the manufacturer's warranty, and workmanship terms are set out in writing in the quote.
How is a complete bay coordinated with civils and electrics?
A complete bay is coordinated by issuing pit, dock face and electrical details early, so the groundworker, main contractor and electrician build exactly what the equipment needs. Most problems on new docks come from mismatches between trades, not from the equipment itself.
- Drawings: we provide pit dimensions, steel edge details, drainage points and dock face levels for each bay.
- Civils: the groundworker forms the pits, approach and dock face to those drawings, or the leveller is set in place for concrete to be poured around it.
- Building envelope: the main contractor forms the openings and cladding to suit the door and shelter sizes.
- Electrics: the electrician brings a supply to the agreed control panel position at each bay.
- Equipment: leveller, door, shelter and safety items are fitted in sequence, then commissioned together.
The quote states clearly which items are ours and which belong to other trades. See our guide to loading bay design for dock heights, widths and approaches.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Lighting inside trailers and at the dock face
- Access for deliveries, cranes or lifting equipment during installation
- Age and condition of the equipment already in place
- How often each door cycles during a typical shift
- Clear opening width and height for each door
- Dock height and the mix of trailers you load
Options to discuss
Chilled or frozen bay
A well-insulated door, inflatable shelter or foam seal and a leveller suited to low temperatures, specified to keep cold air in and warm, moist air out.
High-throughput bay
A faster door, telescopic-lip leveller and vehicle restraint with interlocked traffic lights, for docks handling many trailers a day and where drive-away risk is high.
Regulations and approvals in England
In England, Approved Document L (2021) sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. That shapes door specification for sites in New Milton, so we confirm the requirement for your project and check what applies at survey before recommending a door.
Questions about complete loading bay installations in New Milton
How long does installation take at a site in New Milton?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
Is the site survey in New Milton free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
What details do you need from us to quote for complete loading bay installations?
To get started, send the site address in New Milton, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Do you work with main contractors on new builds?
Yes. On new warehouses we work as the specialist dock package contractor to the main contractor's programme. We provide pit, dock face and electrical details early so the groundworks and building envelope are built to suit the equipment, then install and commission each bay.
What is included in a complete loading bay package?
A complete loading bay package typically includes the door, leveller, shelter or seal, bumpers, wheel guides and a dock light. Vehicle restraints, traffic lights and interlocks can be added. Pits, concrete and groundworks are priced separately unless agreed otherwise, and the quote lists exactly what is included.
Complete loading bay installation near New Milton
Nearby places we cover, measured from New Milton, include Christchurch (5 miles), Bournemouth (10 miles) and Ferndown (11 miles). Ask if your own town is missing.
Other loading bay services in New Milton
Full guide to complete loading bay installations · Everything we do in New Milton
Get in touch about loading bay doors and dock equipment in New Milton: call, email or use the quote tool.