- Location
- Dewsbury, West Yorkshire
- Main postcode district
- WF12
- Nearby (straight line)
- Batley (1 mile), Ossett (2 miles) and Liversedge (3 miles)
- Survey and quote
- Free, with a fixed written quote
A cold store dock door is an insulated loading bay door built for chilled or frozen buildings, usually a sectional door with thick insulated panels or a high-speed door with an insulated curtain. It differs from a standard dock door in its thermal breaks, extra seals and, on freezer docks, heating in the frame or seals so that ice cannot lock the door shut or tear the seals.
Where does this fit at a dock in Dewsbury?
Food manufacturers in Dewsbury moving finished product into frozen storage need doors that resist ice and close quickly behind each forklift or trailer movement. During warm, humid spells, any cold store dock in Dewsbury is most exposed to condensation and ice, which is why heated frames and good shelters are worth considering.
A chilled distribution centre in Dewsbury opens its dock doors many times a shift, so the door specification matters far more than at an ambient bay.
It starts with a free site survey in Dewsbury, where we measure the openings, check the dock and talk through how the bay is used. You then receive a fixed written quote. Once you accept, we manage the job: specialist installation engineers carry out the work under our management, planned around your deliveries, and out-of-hours working can be arranged. At handover we test everything with you and leave the documentation.
How can a cold store door be replaced without losing temperature?
A cold store door can be replaced with very little temperature loss if the work is planned around the store, with the opening screened and the fitting done in one continuous visit.
On a live cold store we usually:
- schedule the work for the quietest period, often overnight or at a weekend,
- fit a temporary insulated screen or strip curtain while the opening is exposed,
- remove ice from the old frame and threshold before fixing the new door,
- pre-assemble as much as possible so the opening is exposed for the shortest time.
From your side we need product moved back from the opening, any site permits for working in cold areas, and power for the operator and frame heaters. Heated frames typically need their own supply, which we set out in the quote. Our cold store loading bays guide covers planning the work in more depth.
How much does a cold store dock door cost?
A cold store dock door typically costs £4,800 to £9,500 per door, excluding VAT, supply and fit. Chilled docks usually sit lower in that range than freezer docks, because freezer doors need more insulation and frame heating.
Price is mainly driven by:
- Operating temperature: chilled, frozen, or a door between two temperature zones.
- Door type: insulated sectional, insulated high-speed, or both at one opening.
- Heating: heated frames, heated bottom seals or threshold heating to stop ice forming.
- Panel thickness and thermal breaks: thicker panels and better breaks reduce condensation and heat gain.
- Controls: faster operators, interlocks with shelters and levellers, and automatic closing.
- Working conditions: installing in a live cold store often means out-of-hours work and temporary screening.
We price each door after a free site survey, and the written quote fixes the cost.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- How drivers are prevented from pulling away too early
- Access for deliveries, cranes or lifting equipment during installation
- Dock height and the mix of trailers you load
- Gaps around trailers where heated or chilled air escapes
- Bumper position and wear or damage on the dock face
- Escape routes and pedestrian doors close to the bay
Options to discuss
Insulated sectional cold store door
Thick insulated panels with thermal breaks and full perimeter seals, the usual choice for chilled and frozen external dock openings that also need to be secure overnight.
Heated frames and seals
Low-power heating in the side frames, bottom seal or threshold that keeps contact surfaces above freezing so the door does not ice up or tear its seals.
What do the rules in England mean for the work?
In England, Approved Document L (2021) sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. That shapes door specification for sites in Dewsbury, so we confirm the requirement for your project and check what applies at survey before recommending a door.
Questions about cold store dock doors in Dewsbury
Is VAT included in your guide prices for cold store dock doors?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in West Yorkshire as everywhere else: for cold store dock doors, it is £4,800 to £9,500 per door, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
How do you price cold store dock doors for a site in Dewsbury?
Guide budgets for supply and fit are £4,800 to £9,500 per door, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Dewsbury site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Will a new door reduce our refrigeration load?
A better-sealed, better-insulated door that stays shut except when a trailer is docked reduces the warm air entering the store, which is a significant source of load at a cold store dock. We cannot promise a figure, because results depend on your store, traffic and the rest of the dock, but the mechanism is well understood.
Do heated door frames use a lot of power?
Frame and seal heaters are low-power elements designed to keep surfaces just above freezing rather than to heat the dock. Many can be controlled by a thermostat so they only run when needed. We set out the supply required in the written quote so it can be planned before installation.
Cold store dock doors near Dewsbury
Distances are measured from Dewsbury. Nearby towns we cover include Batley (1 mile), Ossett (2 miles) and Liversedge (3 miles), and other towns in the area are covered too.
Other loading bay services in Dewsbury
Full guide to cold store dock doors · Everything we do in Dewsbury
Request a quote for your loading bay in Dewsbury, attaching photos of the dock, the equipment and any damage.